U-Line 2175RF manual Troubleshooting Guide, Troubleshooting What to check when problems occur

Page 19

Troubleshooting Guide

DANGER

ELECTROCUTION HAZARD

Never attempt to repair or perform maintenance on the unit until the main electrical power has been disconnected.

Troubleshooting - What to check when problems occur:

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

Unit does not operate and

No electrical supply

Plug unit in or check circuit breaker.

electronic display is blank.

 

 

 

 

 

No interior light

Loose or burned out bulb

Tighten or replace bulb (See MAINTENANCE; LIGHT

 

 

BULB REPLACEMENT).

 

 

 

Electronic display is blank and

Unit is in blackout/Sabbath mode

Exit blackout/Sabbath mode (not Star K certified)

interior light is OFF with door OPEN.

(not Star K certified) lighting mode.

(See OPERATION; INTERIOR LIGHT CONTROL).

 

 

 

Electronic display is blank and

A display function has changed.

Touch and hold the warmer temperature button and

interior light is ON with door OPEN.

 

touch and release the POWER button three times, then

 

 

release the temperature button. The display should

 

 

become visible.

 

 

 

Electronic display shows repeating,

A factory control mode has been

Touch and hold the warmer temperature button and

randomly flashing symbols and

inadvertently entered.

touch and release the LIGHT button three times, then

partial characters.

 

release the temperature button to exit the factory

 

 

control mode. The set-point temperature should now

 

 

be displayed.

 

 

 

Electronic display shows:

A factory control mode has been

Repeatedly touch the warmer temperature button to

0, 1 to 26, or 99.

inadvertently entered.

advance any number shown to 99 and touch and

 

 

release the LIGHT button. The set-point temperature

 

 

should now be displayed.

 

 

 

Electronic display shows E3.

Door has been left open longer than

Close door completely. The set-point temperature

 

20 minutes.

should now be displayed.

 

 

 

Electronic display shows one or

The unit is displaying an error code.

Record the error code(s) displayed and call for service.

more of the following:

 

 

E1, E2, E4, E5, E6, E7, E8, E9, E10, P1.

 

 

 

 

 

Unit not cold enough. Check

Control set too warm

Set control to a cooler setting (See OPERATION). Allow

temperatures (See OPERATION for

 

24 hours for temperature to stabilize.

approximate temperatures).

 

 

Airflow to front grille blocked

Airflow must not be obstructed to front grille (See

 

 

 

OPERATION).

 

 

 

 

Dirty condenser coils

Clean condenser (See MAINTENANCE; CONDENSER

 

 

CLEANING).

 

 

 

 

Door gasket not sealing properly

Door adjustment required (See MAINTENANCE; DOOR

 

 

ALIGNMENT CHECK AND ADJUSTMENT).

 

 

 

Unit is too cold. Check temperatures

Control set too cold

Set control to a warmer setting (See OPERATION). Allow

(See OPERATION for approximate

 

24 hours for temperature to stabilize.

temperatures)

 

 

 

 

 

Noise during operation

Copper water supply tubing

Carefully bend tubing away from cabinet and

 

contacting internal components

components.

 

 

 

 

Certain sounds are normal.

Soft sounds from the fan and water/dropping sounds

 

 

from the ice maker will be heard.

 

 

 

Refrigerator too cold

Temperature control set too cold

Set control to warmer setting (See OPERATION).

 

 

 

 

Inaccurate temperature reading

Properly check temperature (See OPERATION).

 

 

 

CO2175FF, 2175RF

19

Image 19
Contents CO2175FF 2175RF Use and Care GuidePlease Record Your Model Information Warranty RegistrationIntroduction Table of Contents This page intentionally left blank CO2175FF, 2175RF General Precautions Safety Alert DefinitionsSafety Precautions Exclusive Features of Échelon Product FeaturesOperation Temperature ControlChecking Product Temperature Initial StartupInterior Lighting Temperature Display SelectionTemperature Display Adjusting TemperatureNormal Operating Sounds Ice MakerCrisper Food StorageOutdoor, Marine and RV Usage Storage, Vacation, MovingInterior Cleaning As Required General CleaningCleaning and Maintenance Exterior Cleaning As RequiredDefrosting MaintenanceCondenser Cleaning Ice Maker MaintenanceLeveling Ice Cube Thickness Adjustment Interval As Required175 mm Door Alignment Check and AdjustmentDoor Reversal Door Shelf Removal/Insertion Light Bulb Replacement Glass Shelf Removal/InstallationService Before Calling for ServiceIf Service is Required Replacement PartsTroubleshooting What to check when problems occur Troubleshooting GuideProblem Possible Cause Remedy ICE Maker Equipped Models only All Models Task Touch Display Comment Electronic Control Quick GuideThis page intentionally left blank CO2175FF, 2175RF Line Corporation Limited Warranty For General Inquiries For Service and Parts Assistance
Related manuals
Manual 180 pages 38.87 Kb Manual 28 pages 19.37 Kb

2175RF, CO2175FF 2175RF specifications

The U-Line CO2175FF and 2175RF are two of the standout offerings in U-Line’s expansive portfolio of beverage centers, designed to provide both functionality and elegance in residential and commercial settings. Known for their commitment to quality and innovation, U-Line has crafted these models to meet the diverse needs of modern consumers.

The CO2175FF features a dual zone temperature management system, allowing users to store wine and beverages at optimal temperatures. With a precise range from 34°F to 60°F, it ensures that your collections will be preserved perfectly, making it ideal for wine enthusiasts and casual drinkers alike. The refrigerator is equipped with a stainless steel exterior, which not only provides a sleek and sophisticated look but also ensures durability. The glass door is UV-resistant, protecting your beverages from harmful light exposure.

On the other hand, the U-Line 2175RF model focuses on a robust refrigeration system designed for maximum storage capacity. This model features adjustable shelving that provides flexibility to accommodate bottles of various sizes, from standard wine bottles to larger formats. With a total capacity of approximately 24 wine bottles, it gives ample space for your collection while maintaining easy access to all your favorites.

Both models boast a quiet operation and are designed to be energy-efficient, making them ideal for those looking to minimize their environmental impact without sacrificing performance. With state-of-the-art technology such as the touch control panel, users can easily adjust settings and monitor temperature conditions, ensuring peace of mind when it comes to beverage storage.

The U-Line CO2175FF and 2175RF also feature built-in LED lighting, which not only enhances visibility but also adds a touch of ambiance to any room. Users can enjoy their favorite drinks in style, thanks to the elegant interior design.

In summary, the U-Line CO2175FF and 2175RF models represent the perfect blend of style and functionality. With features like dual temperature zones, adjustable shelving, and energy-efficient technology, they cater to the needs of modern beverage storage, making them an excellent choice for any home or business. Whether entertaining guests or simply enjoying a quiet evening, these beverage centers offer a sophisticated solution for all your storage needs.