U-Line CLR2160 STAINLESS, CLR2160OD OUTDOOR Ice Cube Thickness Adjustment, Interval As Required

Page 11

The unit will resume operation approximately 15 minutes after the automated cleaning process is completed. The water fill valve will energize, fill the water reservoir, and shut-off after three minutes. The compressor begins to operate and water flows over the evaporator assembly (ice cube tray). Initially, the water flow may not be uniform, causing uneven sized cubes or water to spill into the ice storage bin. This is a normal situation that will correct itself within the first 24 hours of operation.

IMPORTANT

•Discard all ice produced in the first harvest.

•Should power to the unit be interrupted during the self-clean cycle, it will be necessary to repeat the complete cleaning cycle after power is restored.

Ice Cube Thickness Adjustment

Interval - As Required

Ice thickness adjustments are made using the control panel as follows:

1.To enter the thickness adjustment mode:

•Touch and hold the UP ARROW button.

•Touch and release the DOWN ARROW button three times, then release the UP ARROW button.

•The display will switch to “0” to confirm the thickness adjustment mode has been selected.

2.The factory setting is “0,” and the total range of adjustment is -5 to +5 (ideal range is -1 to +1). Use the UP ARROW button to raise the setting and thicken the ice bridge, or the DOWN ARROW button to lower the setting to thin the ice bridge.

IMPORTANT

Ice thickness adjustment should only be made one increment at a time. Allow ice maker production to stabilize for 24 hours before rechecking ice thickness.

3.Touch and release the LIGHT button key to exit the ice thickness adjustment mode.

4.Remove all ice from the storage bin.

DIMPLES

ICE BRIDGE

Ice Bridge and Dimples

Ice cubes in any given batch will vary, so it is necessary to choose cubes from the sample area for comparison when making adjustments. If further adjustments are desired, repeat Steps 1 through 4.

The ice cube thickness is factory set for best overall performance. The factory setting is designed to maintain an ice bridge of approximately 1/16" to 1/8" under normal conditions resulting in a dimple of approximately 1/4" to 1/2" in depth. A fuller cube with less of a dimple results in a thicker ice bridge. As the ice bridge becomes thicker, the tendency for the cubes to stay together as a slab increases. A bridge thicker than 1/8" may cause cubes to overfill the ice bucket.

 

 

 

 

Cube Types

1/4" TO 1/2"

 

 

1/16" TO 1/8"

DIMPLE

 

 

ICE BRIDGE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GOOD

 

BRIDGE

 

 

BRIDGE

 

TOO THIN

 

 

TOO THICK

DIMPLE

 

 

LITTLE OR

TOO DEEP

 

 

NO DIMPLE

 

 

 

 

 

 

 

 

 

 

 

 

BAD

U-Line Ice Makers

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents USE and Care Guide Introduction Read and save this Use and Care GuidePlease Record Your Model Information Table of Contents Line Use and Care Guide Safety Precautions Safety Alert DefinitionsGeneral Precautions Product Features Model FeaturesCombo Model Features Electronic Control Panel Adjusting Air TemperatureAir Flow Initial StartupInterior Lighting Checking Product TemperatureTo check the actual product temperature in the unit Touch Electronic Control Quick GuideInterval Every 3 Months Clear Ice Maker Cleaning CycleClear Ice Maker Interval As Required Ice Cube Thickness AdjustmentLeveling Removing and Installing Interior ShelvesLightbulb Replacement MaintenanceInstalling the grille Removing and Installing GrilleRemoving and Installing Door Shelves Reversing the door Door Alignment and AdjustmentTo align and adjust the door Door ReversabilityPrepare door for reinstallation Reinstall hinge to bottom oppositeReinstall hinge to top opposite Reinstall Hole PlugsDefrosting Exterior CleaningInterior Cleaning CleaningInterval Every Six Months Condensor CleaningStorage, Vacation and Moving Product DisposalTroubleshooting Guide Before Calling for ServiceIf Service is Required Replacement PartsLine Corporation Limited Warranty LINE.COM

CLR2160 STAINLESS, CLR2160OD OUTDOOR specifications

The U-Line CLR2160OD Outdoor and CLR2160 Stainless refrigerator models combine functionality, durability, and stylistic elegance to meet the demands of modern outdoor living spaces. Designed to withstand the elements while providing reliable cooling, both models are ideal for homeowners who desire convenience and aesthetic appeal in their outdoor entertaining areas.

One of the standout features of the CLR2160OD Outdoor model is its robust construction tailored specifically for outdoor use. Built with stainless steel, it boasts superior weather resistance, ensuring the longevity of the unit even in harsh conditions. The durable materials protect against rust and corrosion, making it perfect for backyards and patios. Its sleek, modern design complements various outdoor settings and adds a touch of sophistication to any gathering.

The CLR2160 stainless version offers the same high-quality performance with a polished appearance, making it a great fit for indoor or outdoor use. Both models feature a generous capacity, allowing users to store wine, beverages, and snacks with ease. With adjustable shelves, the refrigerators optimize storage space according to user preferences, accommodating taller bottles and various sizes.

In terms of technology, both models come with a digital control system that allows precise temperature adjustments. This ensures that beverages are stored at the perfect temperature for enjoyment. The efficient cooling system works quietly, minimizing noise disruption, and enhances the overall user experience. Moreover, the U-Line models are designed to be energy efficient, helping consumers save on utility bills while being environmentally friendly.

The CLR2160OD and CLR2160 Stainless units can also be equipped with additional features such as interior LED lighting, which provides visibility without generating excess heat, further preserving the cooling efficiency. A reversible door swing adds flexibility, allowing homeowners to customize installation based on their space and preferences.

In conclusion, the U-Line CLR2160OD Outdoor and CLR2160 Stainless refrigerators stand out as premier choices for anyone looking to enhance their outdoor or indoor living experience. With their blend of stylish design, robust build, energy efficiency, and user-friendly features, they offer unparalleled convenience for entertaining guests or simply enjoying a relaxing afternoon at home.
Top Page Image Contents