Final finish-only application | U-Line 2275DWRWOL manual

NOTE: Your model will contain an electronic display panel (Figure 28, 3) in the wine rack attached to the bottom drawer. After removing the trim screws, and gently lifting the trim from its location, a wiring harness connector will become visible. Unplug the connector. DO NOT remove drawer from unit.

5.Remove the two screws securing the electronic control to the wood trim. Carefully rotate the wood trim so the electronic control slides out of the wood and place electronic control aside in a safe location.

NOTE: the electronic control and glass front are NOT connected. Be careful when removing control not to drop the glass.

6.Remove the remaining wood fronts from the additional racks by extending racks out as far as possible and then removing the three screws that attach the wood to the racks.

IMPORTANT

DO NOT apply stain/final finish to the wood trim with the electronic display attached to the wood. Damage may occur to the electronic control which is not covered by the warranty.

IMPORTANT

DO NOT use oil-based stains on wood trim. Vapors from oil-based stains will permanently penetrate the liner and will not dissipate over time.

7.Apply Minwax® Water-Based Wood Stain to wood with a synthetic bristle brush or a foam applicator. Allow stain to penetrate approximately three minutes. Before the stain is dry, take a stain dampened rag and remove any excess stain remaining. Wipe in the direction of the grain with medium pressure to achieve the desired stain color.

8.After two hours, repeat step 2. This will even out the color of the wood.

9.Allow stain to dry for a minimum of three hours before applying the final finish.

10.If desired, sand the wood with very fine sandpaper to smooth the surface after the staining process.

11.Remove all dust from the wood, and apply one coat of Minwax® Polycrylic® Protective Finish using a synthetic bristle brush to the wood. This finish should be applied in a thin coat following the direction of the grain.

Apply the finish to the back and sides of the wood first, and allow it to dry for two hours. Apply the finish to the front side of the wood next, and allow it to dry for two hours. Sand with very fine 220 grit sandpaper. Apply two addition coats of the finish in the same manner, but do not sand the trim after the final third coat is applied.

12.Allow the final coat to dry for 24 hours before reinstalling the trim to the cabinet interior components.

Final finish-only application:

1.Follow steps 1 through 6, then continue with step 2 in this section.

2.Lightly scruff sand the wood trim with 280 or finer grit sandpaper.

3.Remove sanding dust with a clean, dry cloth.

4.The factory-applied seal is compatible with virtually all finishes. A low odor, water clean up, quick-drying finish such as Minwax® Polycrylic® Protective Finish is recommended (Minwax® Polycrylic® is an ultra fast- drying water-based finish). Apply a thin coat of a clear, protective finish, following the container label directions.

5.Lightly sand and reapply if desired.

6.Allow the final coat to dry for 24 hours before reinstalling the display to bottom drawer trim and remaining trim to the cabinet interior components.

20	2275DWRWS, 2275DWRWOL

2275DWRWS, 2275DWRWOL, 2275DWRWOL specifications

The U-Line 2275DWRWOL and U-Line 2275DWRWS are premium undercounter refrigerators that epitomize the convergence of advanced technology, sophisticated design, and practicality. Designed with urban lifestyles in mind, these models deliver functionality and elegance, making them an attractive addition to any kitchen or entertainment space.

One of the standout features of the U-Line 2275DWR model series is its capacity. With a generous storage space, these units can accommodate a range of items from beverages to gourmet snacks, all while keeping everything at the perfect serving temperature. The interior is thoughtfully designed with adjustable shelves, allowing users to customize the storage configuration according to their needs. The clear glass door further enhances accessibility, offering a sleek look while enabling easy visibility of contents.

The U-Line series showcases cutting-edge cooling technologies such as an enhanced cooling system with an integrated forced air refrigeration process. This technology ensures uniform temperature distribution and optimal freshness for all stored items. Additionally, the unit is equipped with an adjustable temperature control, allowing users to select their desired chilling environment, catering to various types of beverages and perishables.

Energy efficiency is another hallmark of the U-Line 2275DWR models. Designed with energy-saving features, these refrigerators operate effectively while minimizing energy consumption. The use of LED lighting is not only aesthetically pleasing but also energy-efficient, illuminating the interior without generating excessive heat.

The U-Line 2275DWRWOL features a rich walnut wood panel, which adds a warm, luxurious touch to any setting, while the U-Line 2275DWRWS boasts a sleek stainless steel finish, providing a contemporary appeal. Both models can seamlessly integrate into existing cabinetry, making them an ideal choice for custom kitchen designs.

In terms of user convenience, these models incorporate intuitive touch controls and low vibration compressors, delivering quiet operation. This design choice ensures that users can enjoy their space without disruptive noise.

In summary, the U-Line 2275DWRWOL and 2275DWRWS undercounter refrigerators represent the perfect fusion of form and function. Boasting generous capacity, advanced cooling technology, energy efficiency, and sophisticated design, they stand out as exceptional choices for discerning homeowners looking to enhance their living spaces.