U-Line 1115WC, 1175WC manual Door Reversal

Door Reversal

Black model doors may be left- or right-hand opening. Stainless steel units are not field reversible.

Model 1115WC

To reverse the door, perform the following:

1. Remove the grille and grille cap (two screws).

ULIN_0143_A

Figure 18

2.Remove top hinge from cabinet (three screws) (Figure 18). Hold door to keep it from falling.

3.Lift the door off the bottom hinge.

ULIN_0121_A

Figure 19

4.Remove bottom hinge from cabinet (two screws) (Figure 19).

ULIN_0122_A

Figure 20

5.Remove screws on opposite side of cabinet (Figure 20). Note that there may be a nut behind one or both screws on either side.

ULIN_0123_A

Figure 21

6.Install hinge on opposite side, bottom of cabinet (Figure 21). Replace nut on back side where installed. Align hinge outer edge with cabinet before tightening screws.

1

ULIN_0109_A

Figure 22

16 1115WC, 1175WC