Low Noise Tower | SPX Cooling Technologies Marley Sigma Steel

Marley / Sigma Steel CoolingTower / Specifications: Options

Specifications

Low Noise Tower:

1.1Add the following at the end of this paragraph: The cooling tower shall be quiet operating, and shall produce an overall level of sound no higher than ____

dBA at the critical location indicated on the Plans.

Specification Value

■Sound produced by a Sigma Steel tower operating in an unobstructed environment will meet all but the most restrictive noise limitations – and will react favorably to natural attenuation. Where the tower has been sized to operate within an enclosure, the enclosure itself will have a damping effect on sound. Sound also declines with distance – by about 5 or 6 dBA each time the distance doubles. Where noise at a critical point is likely to exceed an acceptable limit, you have several options – listed below in ascending order of cost impact:

•Where only a slight reduction in noise will satisfy — and the source of concern is in a particular direction — merely turning the tower may be the answer. Less sound emanates from the cased face of the tower than does from the air intake face.

•In many cases, noise concerns are limited to nighttime, when ambi- ent noise levels are lower and neighbors are trying to sleep. You can usually resolve these situations by using two-speed motors in either 1800/900 or 1800/1200 RPM configuration; and operating the fans at reduced speed without cycling “after hours”. (The natural nighttime reduction in wet-bulb temperature makes this a very feasible solution in most areas of the world, but the need to avoid cycling may cause the cold water temperature to vary significantly.)

•Variable speed drives automatically minimize the tower's noise level during periods of reduced load and/or reduced ambient without sacri- ficing the system's ability to maintain a constant cold water tempera- ture. This is a relatively inexpensive solution, and can pay for itself quickly in reduced energy costs.

•Where noise is a concern at all times (for example, near a hospital), the best solution is to oversize the tower so it can operate continu- ously at reduced (1200 or 900 RPM) motor speed even at the highest design wet-bulb temperature. Typical sound reductions are 7 dBA at 2/3 fan speed or 10 dBA at 1/2 fan speed, but larger reductions are often possible.

•Extreme cases may require inlet and discharge sound attenuator sections; however, the static pressure loss imposed by attenuators may necessitate an increase in tower size. This is the least desirable approach because of the significant cost impact – and because of the obstruction to normal maintenance procedures.

Your Marley representative can help you meet your sound require- ments.

Marley Sigma Steel specifications

SPX Cooling Technologies is a prominent name in the cooling industry, and the Marley Sigma Steel is one of their flagship products. This cooling tower is designed to provide an efficient, reliable, and sustainable solution for industrial cooling processes. With its advanced engineering and innovative technologies, the Marley Sigma Steel stands out in various applications, from power plants to chemical processing facilities.

One of the main features of the Marley Sigma Steel is its robust construction. Made from high-quality steel, this cooling tower is built to withstand harsh environmental conditions, ensuring durability over time. The galvanized steel construction offers excellent corrosion resistance, which is critical for operations in challenging environments. This longevity helps reduce maintenance costs and downtime, providing a reliable cooling solution for years to come.

The Marley Sigma Steel incorporates a fan-assisted design that enhances airflow across the heat exchange area, improving the overall thermal performance. This design not only increases the efficiency of heat transfer but also minimizes energy consumption, which is essential for companies looking to reduce operational costs. The axial fans utilized in this cooling tower are engineered for quiet operation and enhanced efficiency, making them an ideal choice for urban and noise-sensitive locations.

Another hallmark of the Marley Sigma Steel is its modular design. The cooling tower can be easily configured to meet specific capacity and space requirements, making it a versatile option for a range of applications. This adaptability allows for seamless integration into existing systems, ensuring that whether it's a new build or a retrofit project, the Marley Sigma Steel can meet the needed specifications while optimizing performance.

SPX Cooling Technologies emphasizes sustainability through the Marley Sigma Steel by incorporating environmentally friendly practices in its design. The tower features options for low make-up water use, minimizing resource consumption during operation. Additionally, the innovative water distribution system ensures even water flow across the fill media, enhancing efficiency and reducing water waste.

In summary, the Marley Sigma Steel from SPX Cooling Technologies is a state-of-the-art cooling solution that combines durability, efficiency, and sustainability. Its advanced engineering and design features, such as the robust steel construction, fan-assisted airflow, modular capabilities, and water-saving technologies, make it a frontrunner in the cooling industry, suitable for a wide array of industrial applications. Companies looking for a reliable, efficient cooling system will find the Marley Sigma Steel to be an excellent choice that meets both current demands and future sustainability goals.