Break-In

Some equipment instead utilizes pulses as a trigger signal. The V-5xe can also accommodate these units. To change trigger modes, turn the rear panel switch “Off” for about 30 seconds to discharge the internal voltages. Then press and hold the front panel switch while turning the rear panel switch “On”. The status LED will rapidly flash red (about 10 Hz) to indicate that the pulse-sensitive mode has been selected. Repeating this procedure will revert the unit back to the level-sensitive mode, as indicated by the status LED slowly flashing red (about 1 Hz).

In the pulse-sensitive mode, a positive-going pulse edge will toggle the amplifier between the “Standby” and “Operate” states, duplicating the action of the front-panel switch.

When using the trigger input, the front panel switch is still operative. However, operating the unit with the front panel switch may put the unit out of “sync” with the control device. If this should occur, simply press the front panel switch again to restore “sync”.

100 to 500 hours of music Due to the manufacturing processes used for the

played through the system will printed circuit boards, wires, and capacitors, a

ensure full break-in.break-in period is necessary for the amplifier to reach its full performance potential.

V-5XE specifications

The Ayre Acoustics V-5XE is an impressive power amplifier designed for audiophiles seeking superior sound quality and performance. This amplifier is a perfect embodiment of Ayre's commitment to innovation, refinement, and attention to detail. The V-5XE is a testament to their philosophy of "the music is the most important thing."

One of the primary features of the V-5XE is its powerful amplification. With a robust 160 watts per channel into 8 ohms, and a remarkable 320 watts into 4 ohms, this amplifier is capable of driving a wide range of loudspeakers with ease. The dynamic headroom provided by the V-5XE ensures that even the most demanding musical passages are rendered effortlessly, delivering a sound that is both impactful and nuanced.

The V-5XE employs Ayre's proprietary Zero Global Feedback design, a hallmark of their engineering approach that seeks to minimize distortion and improve sound purity. By avoiding global feedback, the amplifier allows for a more natural sound reproduction that is faithful to the original signal. This results in a musicality that engages the listener, allowing them to connect more deeply with the music.

In addition to the Zero Global Feedback design, the V-5XE features Ayre's unique "fully balanced" topology. This design eliminates potential noise and interference, resulting in a quieter, more detailed soundstage. It also allows for greater flexibility in system integration, making the V-5XE compatible with a variety of source components and loudspeakers.

Thermal management is another critical aspect of the V-5XE's design. The amplifier utilizes a unique heat-sink system that ensures optimal cooling during operation, preventing thermal distortion and contributing to longevity. This feature allows the V-5XE to maintain consistent performance, even during extended listening sessions.

The exterior of the V-5XE reflects Ayre's commitment to quality, featuring a sleek and elegant design that enhances both aesthetics and functionality. The front panel is both user-friendly and visually appealing, with easy-to-read indicators and a minimalist design that complements any audio setup.

In summary, the Ayre Acoustics V-5XE power amplifier is a remarkable component that combines advanced technology, superior musicality, and elegant design. Its powerful amplification, innovative engineering, and meticulous attention to detail make it a standout choice for those who demand the highest level of performance from their audio systems. Whether for casual listening or critical listening sessions, the V-5XE delivers an exceptional auditory experience that is undeniably captivating.