Oven Cleaning
(continued)
During the
DO NOT line the oven walls, racks, bottom or any other part of the appliance with aluminum foil. Doing so will destroy heat distribution, produce poor baking results and cause permanent damage to the oven interior (aluminum foil will melt to the interior surface of the oven).
Self-Cleaning Oven (Lower Oven)
The lower oven has a
A
1.Adhere to the following cleaning precautions:
•Allow the oven to cool before precleaning.
•Wear rubber gloves when precleaning and while wiping up the residue after the
•DO NOT use oven cleaners or oven protective coatings in or around any part of the
•DO NOT clean the oven door gasket. The woven material of the oven door gasket is essential for a good seal. Care should be taken not to rub, damage or remove the gasket.
•DO NOT use any cleaning materials on the oven door gasket. Doing so could cause damage.
2.Remove the broiler pan and insert, all utensils and any aluminum foil. These items cannot withstand high cleaning temperatures.
3.Oven racks may be left in the oven or may be removed. If they go through the clean cycle their color will turn slightly blue and the finish will be dull. After the cycle is complete and the oven has cooled, rub the sides of the racks with wax paper or a cloth containing a small amount of baby oil or salad oil (this will make the racks glide easier into the rack positions).
4.Remove any excess spillovers in the oven cavity before starting the self- cleaning cycle. To clean, use hot, soapy water and a cloth. Large spillovers can cause heavy smoke or fire when subjected to high temperatures. DO NOT allow food spills with a high sugar or acid content (such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface as they may cause a dull spot even after cleaning.
5.Clean any soil from the oven frame, the door liner outside the oven door gasket and the small area at the front center of the oven bottom. These areas heat sufficiently to burn soil on. Clean with soap and water.
Stopping or Interrupting the Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a
1.Turn the Selector Control knob to OFF.
2.Once the oven has cooled below 550°F and the "Lock" light has gone out, the door can now be opened.
DO NOT force the oven door or the manual door locking lever open. Forcing the door open can damage the door lock. The oven must cool for approximately 1 hour (or below 550°F) before the door lock can be opened. Use caution when opening the door after the
4.Correct the condition which caused the smoking.
5.Restart the
11