11.0RS-232 Protocol (Continued)
!KEY_6<CR> | 6 |
!KEY_7<CR> | 7 |
!KEY_8<CR> | 8 |
!KEY_9<CR> | 9 |
!KEY_SET<CR> | Set button for presets |
!KEY_P1<CR> | Preset 1 |
!KEY_P2<CR> | Preset 2 |
!KEY_P3<CR> | Preset 3 |
!KEY_P4<CR> | Preset 4 |
!KEY_P5<CR> | Preset 5 |
!KEY_P6<CR> | Preset 6 |
!KEY_P7<CR> | Preset 7 |
!KEY_P8<CR> | Preset 8 |
!KEY_P9<CR> | Preset 9 |
!KEY_P10<CR> | Preset 10 |
!KEY_P11<CR> | Preset 11 |
!KEY_P12<CR> | Preset 12 |
!KEY_VOL+<CR> | Volume up |
Volume down | |
!KEY_MUTE<CR> | Volume mute |
!KEY_PWR<CR> | Power On / Off |
!KEY_F1<CR> | Future use. |
!KEY_F2<CR> | Future use. |
!KEY_F3<CR> | Future use. |
!KEY_TV<CR> | TV Source Selection |
!KEY_FM<CR> | FM Source Selection |
!KEY_MENU<CR> | MENU |
!KEY_INFO<CR> | Info |
!KEY_CC<CR> | Closed Captioning |
!KEY_EDS<CR> | Extended Data Services |
!KEY_AUDIO<CR> | Audio |
!PWRON<CR> | Power On |
!PWROFF<CR> | Power Off |
?PWR<CR> | Query Power status responds with ~PWRON<CR> or ~PWROFF<CR> |
!VOLxx<CR> | Volume Level Set xx=00 to 64 Responds with ~VOL52<cr> for volume level 52. |
| 00 is Mute for this command. 52 is zero dB |
?VOL<CR> | Query Volume Level Responds with ~VOL10<CR> for volume level 10. |
?MCH<CR> | Query Main Channel Responds with ~MCH002<CR> for channel 2. |
!MCHxxx<CR> | Main TV Channel change !MCH025<CR> for channel 25. xxx = 001 to 125 |
?MIN<CR> | Main Input Query responds with ~MTV<CR> or ~MFM<CR> |
!FCHxxxx<CR> | FM Channel Selection. !FCH0987<CR> for 98.7fm. |
?FCH<CR> | Query FM Channel responds with ~FCH0987<CR> for 98.7fm. |
?VER<CR> | Version Query responds with ~VER 1.00<CR> if version 1.00 was present. |
?ADDR<CR> | Query Device Address Responds with ~ADDR001<CR> for address 1. |
!ADDRxxx<CR> | Device Address change !ADDR015<CR> for address 15. xxx = 000 to 999 |
!CC1<CR> | Closed Caption 1 selection |
!CC2<CR> | Closed Caption 2 selection |
!CCOFF<CR> | Closed Caption Off selection |
?CC<CR> | Query Closed Caption responds with either ~CC1<CR>, ~CC2<CR>, |
| ~CCOFF<CR> |
!BAUDx<CR> | Baud Rate Selection. |
?BAUD<CR> | Baud responds with ~BAUD1<CR> for 9600. |
!LOCKx<CR> | Lockout Selection. |
?LOCK<CR> | Lock responds with ~LOCK1<CR> for keypad. |
?AFC<CR> | Responds with ~AFCxx<CR> xx=2 digit ASCII decimal equivalent |
Bit 7 | - AFCWIN 1 = inside AFC Window | 0 | = Outside AFC Window | |
Bit 6 | - VIFL | 1 = Video IF Level High | 0 | = Video IF Level Low |
Bit 5 | - FMIFL | 1 = fm IF Level High | 0 | = fm IF Level Low |