AFTER-SALES SERVICE
Before contacting After-Sales Service:
1.See if you can solve the problem yourself with the help of the “Troubleshooting guide”.
2.Switch the appliance on again to see if the problem has been solved. If it has not, disconnect the appliance from the power supply and wait for about an hour before switching on again.
3.If the problem persists after this course of action, contact
INSTALLATION
Specify:
•the nature of the problem,
•the model,
•the Service number (the number after SERVICE on the rating plate located on the side of the fruit and vegetable drawer)
•your full address,
•your telephone number and area code.
Note:
The direction of door opening can be changed. If this operation is performed by
•Install the appliance away from heat sources (minimum distances: 30 cm from coal and paraffin stoves, 3 cm from electric ovens and hobs).
•Install the appliance in a dry,
•Do not obstruct the air vents.
•Clean the appliance interior (see relevant chapters).
•Fit the accessories supplied.
Electrical connection
•Electrical connections must be made in accordance with local regulations.
•Voltage and power consumption are indicated on the rating plate (at the side of the crispers)
•Regulations require that the appliance is earthed. The Manufacturer declines all liabilities for injury to persons or animals or damage to property resulting from failure to observe these regulations.
•If the plug and socket are not of the same type, have the socket replaced by a qualified electrician.
•Do not use extension leads or adapters
Disconnecting the appliance
•It must be possible to disconnect the appliance by unplugging it or by means of a
19