Installation and Switching On The Appliance
•This appliance is connecting to
•You can offer help from the service to install and switching on the appliance without any cost.
•Before making the connection to the power supply, ensure that the voltage on the nameplate corresponds to the voltage of electrical system in your home.
•If the socket does not match the refrigerator plug, replace the plug with a suitable one (at least 16 A)
•Insert the plug into a socket with an efficient ground connection. If the socket has no ground contact, we suggest you call an electrician for assistance.
•Manufacturer is not responsible for failure to complete the ground connection as described in this booklet.
•Do not place the appliance in direct sunlight.
•Do not use in open air and shall not be exposed to the rain.
•Place the refrigerator far from heat sources and in a
•Keep the top free for at least 15 cm.
•Do not place heavy and lots of things on the appliance.
•If the appliance is installed next to another refrigerator or freezer, observe a minimum distance of 2 cm to prevent condensation.
•The appliance must be stand firmly and level on the floor Use the two front
•In order to have air circulation under the appliance, the space under the appliance must be open. Don’t close it with carpet , etc.
•The outside of the appliance and the accessories inside should be cleaned with a solution of water and liquid soap; the inside of the appliance with sodium bicarbonate dissolved in lukewarm water. After drying replace all the accessories.
Before Switching On
•Wait after 3 hours before plugging the appliance in to the main power to ensure proper performance.
•There can be an odour when you first switch on the appliance. It will disappear after the appliance starts to cool.
UK - 3 -