Transport instructions, Disposal, Appliance setup

en	en

Transport instructions

The device should be transported only in upright position.

The packing as supplied must be intact during transportation.

After a transport in the horizontal position, the device may only be taken into operation 4 hours after being stood up vertically again. The appliance must be protected against rain, moisture and other atmospheric influences. The manufacturer assumes no liability if safety instructions are disregarded.

Disposal

Make the device unusable immediately. Pull out the mains plug and cut the power cable. Remove or destroy snap or latch locks before disposing of the device. In this manner you prevent children from locking themselves in and endangering their lives.

Appliance setup

•Do not operate your appliance in a room where the temperature is likely to fall below 10 °C at night and/or especially in winter. At lower temperatures the appliance may not operate, resulting in a reduction in the storage life of the food.

•The climate class rate of your appliance is given on the rating label located inside the appliance. It specifies the appropriate operating ambient temperatures as explained below.

Climatic class	Ambient temperatures
SN	+10 °C to 32 °C
N	+16 °C to 32 °C
ST	+18 °C to 38 °C
T	+18 °C to 43 °C
SN-ST	+10 °C to 38 °C
SN-T	+10 °C to 43 °C

Location

Only place the device in dry rooms which can be aired.

Avoid direct sunlight or direct heat sources such as a stove or a heater.

If this cannot be avoided, the following minimum distances should be maintained: Electric stoves: 3,00 cm

Heater: 3,00 cm

Cooling devices: 2,50 cm

•Ensure sufficient air circulation for your device.

•Make sure that sufficient room is provided around the appliance to ensure free air circulation.

Fit the two plastic wall spacers supplied with the appliance rotating 1/4 turn to the condenser at the back of the appliance (Fig. 3).

•The device should be located on a smooth surface. The two front feet can be adjusted as required. To ensure that your appliance is standing upright adjust the two front feet by turning clockwise or counter-clockwise, until the product is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise.

Electrical connections

Warning

This appliance must be grounded.

•Check whether the power type and voltage in your region corresponds to the one stated on the rating label inside the appliance.

•The electrical safety of the appliance is only assured when the grounding system in the house is installed in accordance with regulations.

•When placing the appliance, do not let the power cable get stuck under it; otherwise the cable will be damaged.

•Ensure that the plug remains readily accessible. Do not use a multiple adapter bar or an extension cable.

•The electrical specifications of your appliance is given on the rating label located inside the appliance.

•Route power cable to allow easy connection and disconnection after installation.

•A contact separator should be used if the power cable is not accessible. (for built-in models)

FD 32 AP specifications

The Smeg FD 32 AP is an impressive addition to any kitchen, seamlessly blending modern technology with a stylish retro design. This multifunctional dishwasher is not only a remarkable appliance but also an embodiment of Smeg's high standards in quality and aesthetics.

One of the standout features of the Smeg FD 32 AP is its generous capacity. It can accommodate up to 13 place settings, making it ideal for families or those who entertain frequently. This capacity ensures that users can load all their dishes in one go, saving time and energy in the process. The interior is thoughtfully designed with adjustable racks and supports for tall items, enhancing versatility.

Equipped with multiple washing programs, the FD 32 AP caters to a variety of cleaning needs. It boasts eight programs including eco, intensive, and delicate cycles. The eco program, in particular, is noteworthy for its energy-efficient operation, reducing water and energy consumption while still delivering excellent cleaning results.

Smeg has incorporated advanced technology into the FD 32 AP, including a high-efficiency inverter motor that not only ensures quieter operation but also enhances durability and performance. This motor is designed to reduce vibrations and noise levels, making it one of the quieter dishwashers available, a significant advantage for open-plan living spaces.

Another remarkable feature is the special rinse aid and salt indicators, which help users maintain the appliance at optimal performance levels. Maintaining water hardness and rinsing efficiency is crucial for achieving spotless dishes, and these indicators simplify the maintenance process.

The design of the FD 32 AP is characteristic of Smeg's vintage aesthetic, featuring a striking pastel color palette combined with chrome detailing. This makes it more than just an appliance; it is a statement piece that adds character to any kitchen.

The Smeg FD 32 AP is also designed with user-friendliness in mind, featuring a simple control panel that is intuitive and easy to navigate. The delay start function allows users to set the dishwasher to run at a more convenient time, enhancing practicality.

In conclusion, the Smeg FD 32 AP showcases a perfect fusion of style and functionality. With its ample capacity, multiple washing programs, advanced technology, and retro design, it stands as a premier choice for those seeking a combination of modernity and classic elegance in their kitchen.