Smeg PGF75SCU3, PGF75U3 Never Test for GAS Leaks with a Match or Other Flames, Natural GAS

Page 5

Conversion Kit

6)

7)

8)

9

10)

Leak testing of the appliance must be conducted according to the following instructions:

Use a brush and liquid detergent to test all gas connections for leaks. Bubbles around connections indicate a leak. If a leak appears, shut off gas valve controls and adjust connections.

Then check the connections again.

NEVER TEST FOR GAS LEAKS WITH A MATCH OR OTHER FLAMES.

Remove all of the detergent solution from the cooktop.

Electronic Ignition System - initial lighting

Cooktop burners use electronic igniters rather than standing pilots. When the cooktop control

knob is pushed in and turned to the "" position, the system lights a spark to ignite the burner. This sparking continues until the control knob is turned to the desired setting.

Check the operation of the cooktop burners. Push in and turn each control knob to the maximum flame

position (). The flame should light within 4 seconds.

If the burners do not light properly, turn the control knob to the O position. Ensure that the burner cap is in the proper position. Ensure that the power supply cord is plugged in and that the circuit breaker or house fuse has not blown. Ensure that the shut-off valve is on the "ON" position. Check operation again. If a burner does not light at this point, contact your SMEG dealer for assistance.

Replace the components on the burner and turn the knobs on the gas tap pins.

Light the burner and set it at minumum .

Remove the knob and turn the regulation screw next to the gas tap pin until you obtain a suitable minimum flame.

Replace the knob and check flame stability by rapidly turning the knob from maximum to minimum. The flame should not go out.

Check flame at the maximum flame position () for a blue color. It should be clean and soft in character. No blowing or lifting of flame should occur. Occasional orange flashes are normal and reflect different elements in the air or gas.

Completely fill out conversion label (part no. XXXXXXX) and attach the label to the bottom of the cooktop beside the rating tag. Do not cover the rating tag with the conversion label.

11)

At higher altitudes, no further adjustments are necessary. Derating the burners is also unnecessary.

 

 

12)

Save the orifices removed from the unit along with these instructions for possible future use.

 

NATURAL GAS:

 

To convert back to Natural Gas: Follow steps 3 through 11 and replace orifices in the order in which they

 

were removed.

7

Image 5
Contents Understand Signal Words Recognize Safety InformationConversion Kit Conversion Kit Fire Hazard BTUNatural GAS Never Test for GAS Leaks with a Match or Other Flames

PGF75SCU3, PGF75U3 specifications

The Smeg PGF75U3 and PGF75SCU3 models are impressive additions to the world of domestic cooking appliances, reflecting the brand’s hallmark of merging style with functionality. Known for their aesthetic appeal, these gas cooktops are designed for the modern kitchen while ensuring exceptional cooking performance.

One of the standout features of the Smeg PGF75U3 and PGF75SCU3 is their robust gas burners. With a total of five burners, including a powerful dual-crown burner for high heat applications, these units provide flexibility in meal preparation. The burners are designed for rapid heating, allowing home cooks to achieve the desired temperature quickly, a vital characteristic for both amateur and seasoned chefs.

In terms of safety, Smeg has integrated flame failure devices into both models. This technology automatically cuts off the gas supply if the flame goes out, ensuring peace of mind during cooking sessions. Additionally, the cooktops feature a sleek, easy-to-clean surface, reducing the hassle of maintaining kitchen hygiene. The enamelled cast iron grates provide durability and stability for cookware, while also adding a touch of elegance to the cooktop’s appearance.

Both the PGF75U3 and PGF75SCU3 offer intuitive controls with front-mounted knobs that allow for accurate heat adjustment. The controls are ergonomically designed for easy accessibility, making it convenient to tweak the flame intensity during cooking without any hassle.

Moreover, the design of these cooktops aligns with Smeg’s retro aesthetic, characterized by rounded edges and a stylish finish, making them not only functional but also a visually striking element in any kitchen. Whether it's the classic black of the PGF75U3 or the chic stainless steel look of the PGF75SCU3, each model complements a range of kitchen styles.

Furthermore, Smeg prioritizes energy efficiency in its designs. The gas burners are engineered to maximize fuel consumption, translating to cost savings and reduced environmental impact. Coupled with high-performance capabilities, these cooktops ensure that energy is used effectively while not compromising on power or efficiency.

With user-friendly features, exquisite design, and advanced safety technologies, the Smeg PGF75U3 and PGF75SCU3 are perfect choices for anyone looking to elevate their cooking experience. They embody a seamless blend of traditional cooking methods with modern technology and design, making them a valuable asset for any culinary enthusiast.