Smeg GKL64-3, GKL755 manual Electrical connection

Page 5

Instructions for the Installer

3.Electrical connection

Check that the power supply line voltage and size are as specified on the nameplate underneath the appliance's casing. This nameplate must never be removed.

The plug on the end of the power supply lead and the wall socket must be of the same type and comply with the relevant regulations. Check that the power supply line is properly earthed.

Pass the power supply cable through the rear of the cabinet, taking care that it does not touch the bottom case of the hob, or the oven (if any) built in underneath it.

The appliance's power supply line must be fitted with an omnipolar breaking device with contact gap of at least 3 mm, located in an easily accessible position close to the appliance itself.

The use of reductions, adapters or junctions is not recommended.

If the power supply cable has to be replaced, the gauge of the wires in the new cable must be at least 0.75 mm2 (3 x 0.75 cable), bearing in mind that the earth wire (yellow-green) must be at least 20 mm longer at the end for connection to the appliance. Use only a type H05V2V2-F or similar cable resistant to a temperature of up to 90°C. The cable must be replaced by a qualified electrician, who must make the mains connection as shown below.

L = brown N = blue

= yellow-green

The power supply lead must be replaced by an authorised service centre to prevent all risks.

The manufacturer declines all responsibility for injury or damage caused by failure to comply with the above regulations or deriving from tampering with even just one part of the appliance.

23

Image 5
Contents Table of Contents Precautions for safety and use Precautions for Safety and UseFixing to the supporting structure Instructions for the InstallerFitting the appliance in the top Instructions for the Installer Electrical connection Gas connection Combustion gas discharge Bottled gas connectionRoom ventilation Removing the hob skin Adapting to different types of gasAdjusting for town gas Adjusting for bottled gasReassembling the hob skin Adjusting for natural gasAdjusting the primary air flow Adjusting the minimum for bottled gas Adjusting the minimum setting for natural gas and town gasHob burner layout Greasing the gas tapsFront panel Instructions for the UserDescription of controls Lighting burners with safety device Using the hobPractical hints for using the burners Positioning the griddle plateBurners Pan diametersCleaning stainless steel Cleaning and maintenanceCleaning the components Never Remove the Fixing Rings to Clean the HOB

GKL64-3, GKL755 specifications

Smeg, an iconic Italian manufacturer known for its stylish kitchen appliances, has garnered attention with its exceptional range of gas cooktops, specifically the Smeg GKL755 and GKL64-3 models. These cooktops combine aesthetic appeal with modern technology, ensuring an efficient cooking experience for any culinary enthusiast.

The Smeg GKL755 is a 75 cm wide gas cooktop that features five burners, providing flexibility for various cooking methods. One of its standout features is the ultra-rapid burner, which delivers high heat for boiling and frying tasks. The cooktop also includes a simmer burner, allowing for gentle heat settings suitable for delicate sauces or melting chocolate. With its powerful burners and versatile heat options, the GKL755 is perfect for both everyday cooking and gourmet meal preparation.

On the other hand, the GKL64-3 is a compact 60 cm gas cooktop that also hosts four burners. Despite its smaller stature, it doesn’t compromise on performance or style. The GKL64-3 features an ergonomic layout, ensuring that each burner is easily accessible while providing ample space for pots and pans. This model is ideal for kitchens with limited space or for those who prefer a more streamlined setup without sacrificing functionality.

Both cooktops come equipped with Smeg’s signature dual flame technology, which allows for greater control over the flame size and heat output. This technology ensures more efficient fuel consumption and precise temperature management, accommodating various cooking techniques. Additionally, the cooktops are designed with durable cast iron pan supports, providing a sturdy base for heavy cookware and enhancing stability during cooking.

Smeg prioritizes safety with features such as the flame failure device, which automatically cuts off gas supply if the flame goes out. This added safety measure brings peace of mind to users, particularly in busy kitchen environments. The intuitive ignition system allows for easy one-handed lighting of the burners, further enhancing the user experience.

Aesthetically, the GKL755 and GKL64-3 models showcase Smeg's classic retro design, crafted with premium materials that exude elegance. The glossy finish and stylish knobs contribute to a sophisticated look, making these cooktops not just functional appliances but also a focal point in kitchen design.

In summary, the Smeg GKL755 and GKL64-3 gas cooktops are remarkable examples of the perfect blend of style and technology. With their diverse burner options, innovative features, and commitment to safety, they are well-suited for both novice and experienced cooks. Investing in either of these models guarantees quality performance and timeless design in any kitchen.