Smeg PTSA725X3, PTSA727X5, PTSA726X5 manual 60 70 cm cm mod. mod A B, Instructions for the Installer

Page 4

Instructions for the Installer

edge of the gasket B. The dimensions in the drawing below refer to the hole on the inside edge of the gasket.

In case of installation on a hollow compartment with doors, a separating panel has to be placed under the hob. Keep a minimum distance of 10 mm between the bottom of the unit and the panel surface. The panel has to be easily removable to allow access in the event of technical service.

See right for the precise holes to be used when securing the hob to the top correctly using the brackets.

Overall dimensions: location of gas and electrical connection points (all measures in mm).

60 70 cm cm mod. mod.

A B

14 6

35 30

Image 4

Contents Table of contents 1. Precautions for safety and use 2. Fitting the appliance in the top7. Using the hob 8. Cleaning and maintenancePrecautions for Safety and Use 1. Precautions for safety and use2. Fitting the appliance in the top Instructions for the Installer2.1 Fixing to the supporting structure 60 70 cm cm mod. mod A B 3. Electrical connection 3.1 Clearance above and around domestic appliances REQUIREMENTS3.2 Room ventilation 3.3 Discharge of combustion products4. GAS CONNECTION 5. Adapting to different types of gas 5.1 Removing the hob skin5.2 Adjusting for bottled gas 5.3 Adjusting for natural gasBurner ULPG - 2.75 kPa5.4 Adjusting the primary air flow 5.6 Adjusting the minimum setting for natural gas and town gas5.7 Adjusting the minimum for bottled gas 5.5 Reassembling the hob skin5.9 Greasing the gas taps 5.8 Hob burner layoutBurner type BURNER LAYOUT - Key to symbols Instructions for the User6. Description of controls 6.1 The front panel7. Using the hob 7.1 Lighting burners with safety device7.3 Practical hints for using the burners 7.2 Positioning the griddle plate7.4 Pan diameters BURNERS8. Cleaning and maintenance 8.1 Cleaning stainless steel8.2 Cleaning the components 8.1.1 Routine daily hob cleaning