Smeg ST143 instruction manual Troubleshooting Minor Problems

Page 21

User instructions

TROUBLESHOOTING MINOR PROBLEMS

In some cases it is possible to remedy minor problems by referring to the following instructions:

If the program fails to start, check that:

the dishwasher is connected to the electrical power supply;

there is no power failure;

the water tap is open;

the dishwasher door is properly closed.

If water remains inside the dishwasher, check that:

the drain hose is not kinked;

the drain siphon is not obstructed;

the dishwasher filters are not clogged.

If the dishes are not being cleaned properly, check that:

the correct amount of detergent has been added;

there is regenerating salt inside the special container;

the dishes are being loaded correctly;

the selected program is suitable for the dish types and their degree of soiling;

all the filters are clean and positioned correctly;

the spray arm nozzles are not obstructed;

there is no object obstructing the rotation of the spray arms.

If the dishes fail to dry or remain dull, check that:

there is rinse aid inside the special container;

the rinse aid dispenser setting is correct;

the detergent used is of good quality and has not lost its effectiveness (for example, through incorrect storage, with the box left open).

If the dishes show signs of streaking, staining, etc., check that:

the rinse aid dispenser setting is not too high.

If there are visible traces of rust inside the tank:

the tank is made of steel, and therefore any rust marks are due to external elements (fragments of rust from the water pipes, pots, cutlery, etc.). Special products are commercially available t o remove such marks;

check that the amount of detergent being used is correct. Certain detergents can be more corrosive than others.

check that the cap of the salt container is securely closed, and that the water softening setting is correct.

If after following the above troubleshooting instructions the problem persists, call the nearest After- Sales Centre.

WARNING: any operations performed on the appliance by unauthorised persons are not covered by the warranty and shall be paid for by the user.

44

Image 21
Contents Dishwasher Contents Safety and operating instructions Safety instructionsAquastop Models Installation and hook-up Installation instructionsConnecting to the Water Supply Water supply connectionDrain Connection Electrical connectionSetting the Washing Program and Switching on Half Load Indicator LightUser instructions Description of the controlsReference standard Table for Certification BodiesCancelling the Current Program Half Load Wash Setting certain models onlyWashing programs Changing the ProgramRemoving the Dishes END of CycleOperating instructions Using the water softening systemWater Hardness Table Setting Adjusting the Water Softening SystemUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser SettingAdding the Rinse AID Adding the Detergent General warnings and recommendations Lower Basket Using the basketsLoading the Lower Basket Loading examplesUpper Basket Cutlery BasketLoading the Upper Basket Adjusting the Upper BasketPull-out version Push-button versionCleaning the Water Intake Filter Cleaning and maintenanceCleaning the Spray Arms Cleaning the Orbital Version Spray ARMProlonged Disuse Cleaning the Filter UnitTroubleshooting Minor Problems Troubleshooting 598 Vorrichtung für die Einstellung der Spannung der Türfedem