Installation Warnings and Tips, General Care

INSTALLATION WARNINGS AND TIPS

ABOUT THESE	LOUD MUSIC AND	ABOUT POWER
INSTRUCTIONS:	HEARING:	HANDLING:
Installation of marine audio	Playing loud music in a marine envi-	JBL marine speakers will produce
components can require extensive	ronment can permanently damage	reasonable volume levels with little
experience with a variety of	your hearing, as well as hinder your	ampliﬁer power. Moreover, adding
mechanical and electrical	ability to hear marine trafﬁc. The	an ampliﬁer to drive your speakers
procedures. Although these	maximum volume levels achievable	and a subwoofer will enhance your
instructions explain how to install	with JBL speakers, combined with	system’s dynamic range and help
JBL marine speakers in a general	high-power ampliﬁcation, may	overcome ambient noise.
sense, they do not show the exact	exceed safe levels for extended
installation methods for your	listening. JBL accepts no liability	Although JBL marine speakers are
particular application. If you do not	for hearing loss, bodily injury or	designed to handle the power of a
feel you have the experience, do	property damage as a result of	dedicated ampliﬁer driven at or
not attempt the installation yourself.	use or misuse of this product.	below its rated power, make sure
Ask your authorized JBL marine		the ampliﬁer is not driven far above
audio dealer about professional	GENERAL CARE:	its rated power. Doing so will “clip”
installation options.	The loudspeaker grilles may be	the output signal and can damage
	cleaned with a damp cloth. Do not	any speaker. Distorted or “fuzzy”
	use any cleaners or solvents on the	sound from your speakers is an
	grilles or the speaker cones.	indication that the ampliﬁer has
		exceeded its rated power, and you
		should reduce the volume level.

INSTALLATION TIPS:

•Always wear protective eyewear when using any tools.

•Turn off all audio components and other electrical devices before you start. Disconnect the negative (–) lead from your battery.

•Keep speakers in their package until ﬁnal installation. When mov- ing a speaker, always rest it with the cone or dome facing up. Never use force to install any speaker.

•Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Remember that the screws can extend behind the surface.

•At the installation sites, locate and make a note of all fuel lines and electrical wiring. Use extreme caution when cutting or drilling in and around these areas.

•Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl to keep material from snagging in a drill bit or saw.

•The stainless-steel hardware provided with your JBL marine speakers has been chosen to resist rust and corrosion.

MS9200, MS6100, MS6200 specifications

The JBL MS series car audio speakers, including the MS6200, MS9200, and MS6100, are designed for automotive enthusiasts who seek high-quality sound reproduction, reliability, and innovative technology. Each model in this series offers unique features and specifications that cater to the diverse needs of car audio lovers.

The JBL MS6200 is a 2-way coaxial speaker that delivers exceptional audio performance. With a peak power handling of 240 watts and RMS power of 80 watts, this speaker produces rich, full-bodied sound that enhances any music genre. The MS6200 features a 6.5-inch polypropylene woofer cone, which ensures durability and moisture resistance, making it ideal for various environmental conditions. Additionally, the 0.75-inch polycarbonate dome tweeter provides clear highs, contributing to an overall balanced audio experience. The built-in crossover allows for precise sound separation, ensuring that mid-bass, midrange, and treble frequencies are well-defined.

Moving up the range, the JBL MS9200 boasts increased power handling and a larger woofer size of 6x9 inches, making it perfect for delivering deeper bass while maintaining clear vocal reproduction. With a peak power handling of 350 watts and an RMS of 120 watts, the MS9200 is engineered for high-performance audio. This speaker utilizes a rugged rubber surround for enhanced performance and longevity. Its sensitivity rating further allows for wide compatibility with various car audio systems, ensuring that the sound is crisp and dynamic, regardless of the source.

The MS6100, another notable option in the series, is a 2-way 6.5-inch speaker tailored for users looking for strong sound in a compact package. With a peak power handling capacity of 220 watts and an RMS output of 75 watts, it provides robust audio performance without occupying excessive space. The MS6100 incorporates a woven polypropylene cone which promotes lightweight yet sturdy construction, delivering excellent sound fidelity. The speaker's silk dome tweeter ensures smooth high-frequency reproduction, enhancing the overall listening experience.

Each model in the JBL MS series is engineered with state-of-the-art features, such as thermal protection and a low-distortion design that minimizes audible noise. The speakers are designed with easy installation in mind, allowing both novice and experienced users to upgrade their car audio systems efficiently. With their advanced technologies and robust characteristics, the JBL MS6200, MS9200, and MS6100 speakers stand out as versatile options that significantly enhance the in-car audio experience.