Smeg ST1105, ST1107S instruction manual Safety instructions

Page 13

Safety instructions

1. Safety and operating instructions

THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USE, AND COMPLIES WITH THE EEC DIRECTIVES 72/23, 89/336 (INCLUDING 92/31) CURRENTLY IN FORCE, INCLUDING THE PREVENTION AND ELIMINATION OF RADIO FREQUENCY INTERFERENCE. THE APPLIANCE IS DESIGNED FOR THE FOLLOWING PURPOSE: WASHING AND DRYING OF DISHES; ANY OTHER USE SHALL BE CONSIDERED IMPROPER. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR USES OTHER THAN THOSE

DESCRIBED ABOVE.

THE NAME PLATE FEATURING THE TECHNICAL DATA, SERIAL NUMBER AND MARKINGS IS VISIBLY POSITIONED ON THE INNER EDGE OF THE DOOR. THE NAME PLATE ON THE INNER EDGE OF THE DOOR MUST NEVER BE

REMOVED.

DO NOT LEAVE THE DISCARDED PACKAGING MATERIALS UNSUPERVISED WITHIN THE HOME. SEPARATE THE VARIOUS MATERIALS WHICH MAKE UP THE PACKAGING AND TAKE THEM TO THE NEAREST SORTED WASTE COLLECTION CENTRE.

THE APPLIANCE MUST BE PROVIDED WITH AN EARTH CONNECTION IN ACCORDANCE WITH THE ELECTRICAL SAFETY REGULATIONS IN FORCE.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE TO PERSONS OR PROPERTY RESULTING FROM THE FAILURE TO EARTH THE APPLIANCE OR FROM A DEFECTIVE EARTH CONNECTION.

IF THE APPLIANCE IS NOT CONNECTED TO THE ELECTRICAL POWER SUPPLY BY MEANS OF A PLUG, IT IS NECESSARY TO INSTALL AN ISOLATION SWITCH WITH A CONTACT OPENING GAP OF AT LEAST 3 MM.

THE PLUG ON THE POWER CORD AND THE CORRESPONDING SOCKET OUTLET MUST BE OF THE SAME TYPE, AND MUST CONFORM TO THE REGULATIONS IN FORCE. CHECK THAT THE VOLTAGE AND FREQUENCY OF THE ELECTRICAL POWER SUPPLY MATCH THE RATINGS ON THE NAME PLATE. AVOID USING ADAPTORS OR SHUNT CONNECTIONS.

NEVER UNPLUG THE APPLIANCE BY PULLING THE POWER CORD.

AFTER INSTALLATION, THE PLUG MUST REMAIN ACCESSIBLE.

IN THE EVENT OF DAMAGE TO THE POWER CORD, HAVE IT REPLACED BY A QUALIFIED TECHNICIAN.

AFTER CHANGING THE POWER CORD, MAKE SURE THAT THE BRACKET WHICH SECURES THE CORD IS FIXED SECURELY IN PLACE.

IF THE APPLIANCE IS INSTALLED ON A CARPETED OR COVERED FLOOR, ENSURE THAT THE OPENINGS ON ITS UNDERSIDE ARE NOT OBSTRUCTED.

ALWAYS SWITCH OFF THE DISHWASHER AFTER EACH USE TO AVOID WASTING ELECTRICITY.

OBSOLETE APPLIANCES MUST BE RENDERED UNUSABLE. CUT OFF THE MAINS POWER CORD AFTER UNPLUGGING IT FROM THE WALL OUTLET, AND MAKE SAFE ANY COMPONENTS WHICH MIGHT BE DANGEROUS FOR CHILDREN (LOCKS, DOORS, ETC.). THE APPLIANCE MUST THEN BE TAKEN TO A SORTED WASTE COLLECTION CENTRE.

20

Image 13
Contents Guide for Using the Dishwasher and the Washing Programs Contents User instructions 105 Washing programs Changing the Program Adjusting the Water Softening System To Save on ENERGY! … and Protect the Environment Troubleshooting User instructions For Cleaning Dishwashers Contents Safety instructions Aquastop Models Water supply connection Connecting to the Water SupplyDrain Connection Electrical connectionUser instructions Using the water softening systemAdjusting the Rinse AID Dispenser Setting Using the rinse aid and detergent dispensersAdding the Rinse AID Adding the Detergent General warnings and recommendations EN 50242 Standard Loads for Certification Bodies Using the basketsLower Basket Loading the Lower BasketUpper Basket Cutlery BasketLoading the Upper Basket Adjusting the Upper BasketCleaning the Spray Arms Cleaning the Water Intake FilterCleaning the Spray ARM, Travelling Version Prolonged Disuse Cleaning the Filter UnitTroubleshooting Minor Problems Technical Data 19 570 0050

ST1107, ST1105, ST1107S specifications

Smeg, a renowned Italian brand known for its stylish and innovative kitchen appliances, offers a range of toasters that combine functionality with design. Among the standout models are the Smeg ST1107S, ST1105, and ST1107, which showcase the brand's commitment to quality and aesthetic appeal.

The Smeg ST1107S is part of a sleek, retro-styled toaster lineup that promises to enhance any kitchen decor. One of its key features is its ability to toast up to four slices of bread simultaneously, making it ideal for families or gatherings. The toaster also includes six browning levels, allowing users to customize their toasting experience based on personal preferences, ensuring that everybody enjoys their toast just the way they like it.

A unique characteristic of the ST1107S is its reheat and defrost functions. The reheat feature allows users to warm up toast without burning it, while the defrost option is perfect for frozen bread, providing a quick and efficient way to enjoy breakfast without the long wait. The toaster's stainless steel construction not only contributes to its aesthetic appeal but also offers durability, ensuring it can withstand the rigors of daily use.

Similarly, the Smeg ST1105 model, featuring a compact design, offers the same four-slice capacity and customizable browning settings. A notable aspect of the ST1105 is its dual independent control panels, which allow users to toast two different kinds of bread simultaneously, catering to varying tastes within the household. This flexibility makes the ST1105 a versatile addition to any kitchen.

The ST1107 model, on the other hand, caters to those who prefer a more classic design while incorporating modern technology. Like its counterparts, it features a high-lift mechanism that allows for easy retrieval of smaller bread items such as bagels or English muffins. Its non-slip feet provide stability during operation, ensuring safe usage.

All three models are equipped with removable crumb trays, making cleanup a breeze and promoting hygiene in the kitchen. With their combination of design, functionality, and advanced features, the Smeg ST1107S, ST1105, and ST1107 toasters cater to both aesthetic and practical needs, making them perfect companions for any modern culinary enthusiast.