Gas Connection, Instructions for the installer

Instructions for the installer

3.GAS CONNECTION

This appliance is suitable for installation with Natural Gas or ULPG (propane). Refer to page 12 for the relevant burner pressure and appropriate injector sizes. When the appliance is to be connected to Natural Gas then the pressure regulator supplied must be fitted to the gas inlet. A test point (for checking the gas pressure) is supplied either with the regulator or as a separate fitting in the case of LPG (propane) appliances.

Connection of the appliance to the gas supply must be in accordance with the requirements of AS5601. A ½” BSP connector at the inlet is recommended and the gas supply line to the appliance must be of adequate length to allow sufficient withdrawal of appliance for service or disconnection and be:

1.annealed copper pipe or;

2.flexible hose according to AS/NZ1869 & be at least Class “B”, 10 mm diameter.

The appliance must be installed with provision to allow the gas to be turned off and disconnected for servicing and removal of the appliance as required from the gas supply.

Before the appliance is operated make certain all relevant parts are placed in the correct position.

When the installation is completed the installation connections of appliance will require to be leak tested, the burner operating pressure and flame checked and adjusted.

Warranty service calls do not cover these adjustments!

To check the operating pressure of the appliance it is recommended at least 2 large size burners are used. Ensure appliance is secured to wall when installation is completed.

N.G. The regulator supplied must be fitted to the ½ BSP thread at the rear of the appliance. An approved manual shut-off valve must be installed. The N.G. regulator must be checked and adjusted to 1.0kPa after installation.

U.L.P.G. Can be connected to the inlet fitting directly. The pressure must be checked to ensure it is operating at 2.75kPa. A separate test point fitting must be installed between the piping & the appliance for the pressure to be checked to ensure it is operating at 2.75kPa.

CIR597X5, CIR597X specifications

The Smeg Built-In Hob, model CIR597X, is a sophisticated cooking appliance that blends functionality with contemporary aesthetics, making it an ideal choice for modern kitchens. This hob is designed to enhance your cooking experience with its innovative features and high-quality materials.

One of the standout characteristics of the CIR597X is its advanced induction cooking system. Induction hobs offer several advantages over traditional gas or electric hobs, including faster heating times, precise temperature control, and enhanced energy efficiency. With the Smeg CIR597X, you can boil water in a fraction of the time while only heating the cookware, ensuring that less energy is wasted and the kitchen remains cooler.

The CIR597X features a sleek and elegant design, with a smooth glass surface that is easy to clean and maintain. This minimalist aesthetic not only adds a touch of sophistication to any kitchen but also allows for seamless integration into your countertop. The hob has a total of five cooking zones that vary in size, providing versatility to cater to various pot and pan sizes.

One of the key technologies incorporated into the Smeg CIR597X is the Bridge function, which allows two cooking zones to be combined into a larger zone. This is particularly useful when using griddles or larger cookware, providing more flexibility during meal preparation.

Safety is paramount in the design of the CIR597X, which includes several built-in safety features such as automatic shut-off and residual heat indicators. These features provide peace of mind, ensuring that your cooking space remains safe for all family members.

Users appreciate the intuitive touch control panel, which allows for easy adjustments of power levels and cooking times. With multiple power settings, you can manage everything from gentle simmering to high-temperature searing with unparalleled precision.

In addition, the Smeg CIR597X boasts a child lock feature, preventing unintended changes to the settings, making it a family-friendly option for those with young children.

Overall, the Smeg Built-In Hob CIR597X is a perfect amalgamation of style and technology, providing a powerful cooking solution that caters to the demands of both professional chefs and home cooks alike. With its energy-efficient induction technology, sleek design, and user-friendly features, it represents a significant advancement in modern kitchen appliances. Investing in the CIR597X allows you to elevate your culinary skills while enjoying the benefits of a safer and more convenient cooking experience.