Operation, Power, Level Control, Video Contour

Operation

Power

When the unit is plugged in and power is on and no signal is received, the LED on the front of the unit will turn red. When a signal is present, the LED will turn green. Note: It will take several minutes for the LED to turn from green to red after the input signal to

the subwoofer is removed. Due to JBL’s unique, high-effi- ciency digital-amplifier design, power consumption is minimal when the subwoofer is not receiving a signal. Of course, the subwoofer can be turned off, whenever desired.

Level Control

The subwoofer Level Control, located on the front panel, adjusts the volume of the subwoofer relative to the rest of the system. Proper level adjustment depends on several variables such as room size, subwoofer placement, type of

main speakers and listener position. Adjust the subwoofer level so that the volume of the bass information is pleas- ing to you.

Video Contour

The video-contour switch, located on the front panel, optimizes the subwoofer’s performance for movie listen- ing. When the video-contour switch is “on,” the subwoofer’s performance is tailored to deliver the impact and

excitement of today’s movies. The green LED will illuminate when the video-contour switch is on.

Crossover Adjustments

Low-Pass Control

The Low-Pass control deter- mines the highest frequency at which the subwoofer reproduces sounds. If your main speakers can comfortably reproduce some low-frequency sounds, set this control to a lower frequency setting, between 50Hz – 100Hz. This will concentrate the subwoofer’s efforts on the ultradeep bass sounds required by today’s films and music. If you are using smaller bookshelf speakers that do not extend to the lower bass frequencies, set the low-pass crossover control to a higher setting, between 120Hz – 180Hz.

120

90150 High Pass

60180

120

90	150 Low
	Pass
60	180

High-Pass Control

•If you hooked up your sub- woofer as shown in Hookup 4 on page 5, you also have the capability of adjusting the high-pass frequency. The High-Pass control determines the frequency at which the main speakers will start reproducing sounds. If your main speak- ers can comfortably repro- duce some low-frequency sounds, also set this control to a lower frequency setting, between 50Hz – 100Hz. This will concentrate the subwoofer’s efforts to the ultradeep bass sounds, while your main speakers continue to reproduce the mid-bass information. If you

are using smaller bookshelf speakers that do not extend to the lower bass frequencies, set the high-pass crossover control to a higher setting, between 125Hz – 180Hz. With this setting, your main speakers will not have the burden of reproducing any low-frequency sounds.

•If you hooked up your sub- woofer as shown in Hookup 1 on page 3, the high-pass frequency is fixed at 180Hz.

•If you hooked up your subwoofer as shown in Hookup 2 or Hookup 3 on page 4, no high-pass control adjustments can be made from the subwoofer. Unless your receiver/ampli-

fier incorporates a high-pass crossover, your main speak- ers will continue to get a full-range signal.

Final adjustment and blending of the low-pass and high-pass controls may evolve over sev- eral listening sessions. A good starting point would be to set both the low- and high-pass controls to the same frequency and adjust from that point.

– 6 –

PSW-D112 specifications

The JBL PSW-D112 is a powerful subwoofer that delivers deep, resonant bass, making it an excellent addition to any home theater or audio system. This subwoofer is particularly designed for audiophiles and movie enthusiasts looking for an immersive sound experience.

One of the standout features of the PSW-D112 is its robust 12-inch polypropylene cone driver. This driver is engineered to produce deep, impactful lows that are crucial for a full-bodied bass experience. The cone material is not only lightweight but also rigid, enabling the subwoofer to produce accurate sound without distortion, even at high volumes.

The PSW-D112 is equipped with a built-in 300-watt RMS amplifier, providing ample power to reproduce deep bass frequencies efficiently. This built-in amplifier is designed to handle a wide range of frequencies and ensures that the subwoofer can maintain consistent output without sacrificing sound quality. The amplifier also features a high-efficiency Class D design, which minimizes energy consumption while maximizing performance.

JBL incorporates advanced bass reflex technology in the PSW-D112, utilizing a rear-firing port to enhance low-frequency response. This design allows the subwoofer to create a more profound and fuller sound by harnessing the natural airflow produced during bass reproduction. The combination of the ported design and the powerful driver ensures that the PSW-D112 can fill any room with rich, booming bass.

For added flexibility, the PSW-D112 comes with adjustable controls for volume, low-pass crossover, and phase adjustment. These features allow users to fine-tune the subwoofer to suit their specific listening environments and preferences. Whether you're watching an action-packed movie or listening to your favorite music, the ability to customize the sound output enhances your overall experience.

The build quality of the PSW-D112 is another highlight. With a sleek, modern design, it easily integrates into any home decor. The cabinet is constructed from high-quality materials that not only give it a premium look but also help to reduce unwanted vibrations, ensuring clear sound reproduction.

In summary, the JBL PSW-D112 subwoofer combines power, precision, and versatility, making it an exceptional choice for anyone serious about enhancing their audio experience. With its advanced technologies and thoughtful design features, it promises to deliver deep, immersive bass that will elevate any audio setup.