Smeg CS71-5 manual Installation of the Appliance, Electrical connection

Page 4

Instructions for the installer

2. INSTALLATION OF THE APPLIANCE

It is the law that all gas appliances are installed by competent persons. Corgi gas installers are approved to work to safe and satisfactory standards. All gas installation, servicing and repair work must be in accordance with the gas safety regulations 1984 (installation and use) as amended 1990.

This unit is equipped with a type Y fire protection, and may be set against walls that are higher than the hob.

2.1 Electrical connection

Make sure that the power line voltage matches the specifications indicated on the rating plate located inside the storage compartment.

This rating plate must never be removed.

If the appliance is hooked-up to the supply by means of a fixed connection, install a multipolar cut-out device on the line, with contact opening distance equal to or greater than 3 mm, located near the appliance and in an easily reachable position.

Hook-up to the supply may be fixed or with plug and socket. In the latter case the plug and socket must be suitable for the cable employed and conform with the regulations in force. Regardless of the type of connection, earthing of the appliance is absolutely obligatory. Before connection make sure that the supply line is suitably earthed. Avoid the use of reducers, adapters or shunts.

The manufacturer declines all responsibility for damage to persons or things caused by non-observance of the above prescriptions or by interference with any part of the appliance.

If the power cable is replaced, the wire section on the new cable must not be less than 1.5 mm2 (3 x 1.5 cable), keeping in mind that the end to be connected to the hob must have the ground wire (yellow-green) longer by at least 20 mm. Use only the special cables available at our Service Centres.

34

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Contents Introduction Instructions for Safe and Proper USEPlate Must not be Removed Electrical connection Installation of the ApplianceThis rating plate must never be removed Connecting to natural and LPG gas Ventilation requirementsAdaptation to Different Types of GAS Changing nozzlesBurner and nozzle characteristics table Arrangement of burners on cooking hobLPG G30/G31 28/37 mbar Natural GAS G20 20 mbarAdjustment of minimum for natural gas Final OperationsRegulation of minimum for LPG Positioning and levelling of the applianceDescription of Symbols Cooking HOB Burner Command KnobDescription of Controls Front control panelOven Thermostat Knob Oven Variable Grill KnobElectronic Analogue Clock Setting the timeList of Functions Minute-minder Programming Demo Function Practical advice for using the cooking hob burners USE of the Cooking HOBLighting of the cooking hob burners Diameter of containersUSE of the Oven Cooling fanAvailable Accessories Cooking Hints Function Switch Thermostat Selector Switch from 50 to 250CHot-air cooking Function Switch Thermostat Selector Switch from Function SwitchHot-air grilling DefrostingTraditional cooking Variable grill cookingSpit cooking Cleaning stainless steel Cleaning and MaintenanceCleaning of cooking hob components Cleaning the inside of the oven Self-cleaning linersBurner caps and flame cap crowns Ignition plugs and thermocouplesUsing the self-cleaning liners 10.3.3Looking after the self-cleaning liners10.3.4Assembling the self-cleaning liners Door glassExtraordinary Maintenance Replacement of light bulbsOven door gaskets Removing the doorLubrication of gas taps

CS71-5 specifications

The Smeg CS71-5 is a standout kitchen appliance that combines elegant design with innovative features, making it a popular choice for modern households. This combination of functionality and style sets the Smeg CS71-5 apart in the competitive market of cooking appliances.

One of the main features of the Smeg CS71-5 is its powerful cooking performance. It boasts a gas burning system that consists of five burners, enabling users to cook multiple dishes simultaneously. The burners vary in size, providing flexibility for both large pots and smaller pans. This versatility is ideal for anyone who enjoys complex meal preparation, ensuring that various cooking techniques can be employed at once.

The design of the Smeg CS71-5 is equally impressive, embodying the classic retro aesthetics that the brand is renowned for. With its stainless-steel finish and ergonomic knobs, this appliance not only looks stylish in any kitchen but is also easy to use. The control knobs are conveniently placed, allowing for precise adjustments to heat settings, which is essential for achieving perfectly cooked meals.

In terms of safety, the Smeg CS71-5 is equipped with advanced flame failure safety devices. These devices automatically cut off the gas supply if a flame goes out unexpectedly, providing peace of mind for users. This feature is particularly vital in households with children or where safety is a primary concern.

Furthermore, the Smeg CS71-5 incorporates cutting-edge technology. The burners feature a rapid ignition system that ensures instant lighting, while the cast iron pan supports provide excellent stability for pots and pans. This not only enhances the cooking experience but also contributes to evenly distributed heat for optimal cooking results.

Another notable characteristic of the Smeg CS71-5 is its ease of cleaning. The high-quality stainless-steel surface resists stains and is easy to wipe clean, allowing users to maintain a pristine cooking environment effortlessly. The removable components, such as the grates, are designed for easy handling, further simplifying the cleaning process.

In summary, the Smeg CS71-5 is a blend of style, safety, and advanced cooking technology. Its five burner configuration, retro design, safety features, and user-friendly characteristics make it a must-have for aspiring chefs and home cooks alike. With its combination of aesthetics and performance, the Smeg CS71-5 is truly an exceptional addition to any kitchen.
Top Page Image Contents