Smeg SSA91MFP1, SSA91MFA1, SSA91MFX1 manual Electrical connection, Ventilation requirements

Page 5

Instructions for the installer

2.1 Electrical connection

Make sure that the power line voltage matches the specifications indicated on the rating plate located inside the storage compartment.

This rating plate must never be removed.

If the appliance is connected to the supply by means of a fixed connection, install a multipolar cut-out device on the line, with contact opening distance equal to or greater than 3 mm, located near the appliance and in an easily reachable position.

Connection to the supply may be fixed or with plug and socket. In the latter case the plug and socket must be suitable for the cable employed and conform with the regulations in force. Regardless of the type of connection, earthing of the appliance is absolutely obligatory. Before connection make sure that the supply line is suitably earthed. Avoid the use of reducers, adapters or shunts.

1- For operation on 220-240V∼: use a three-poleH05RR-F or H05V2V2-F cable having a cross section of 3 x 2.5 mm2 (90 cm wide models) or 3 x 1.5 mm2 (60 cm wide models).

2- For operation on 380-415V2N∼(only for 90 cm wide

models): use a four-pole H05RR-F or H05V2V2-F cable having a cross section of 4 x 1.5 mm2.

3- For operation on 380-415V3N∼(only for 90 cm wide

models): use a five-pole H05RR-F or H05V2V2-F cable having a cross section of 5 x 1.5 mm2

The cable end to be connected to the appliance must be provided with ground wire (yellow-green) at least 20 mm longer.

Caution: only 90 cm wide models can be connected on a two-phase or three-phase system.

2.2 Ventilation requirements

The room containing the appliance should have an air supply in accordance with B.S. 5440 part 2 1989.

1.All rooms require an opening window or equivalent, and some rooms will require a permanent vent as well.

2.For room volumes up to 5 m3 an air vent of 100 cm2 is required.

3.If the room has a door that opens directly to the outside, and the room exceeds 1 m3 no air vent is required.

4.For room volumes between 5 m3 and 10 m3 an air vent of 50 cm2 is required.

5.If there are other fuel burning appliances in the same room B.S. 5440 part 2 1989 should be consulted to determine the air vent requirements.

6.This appliance must not be installed in a bed sitting room of less than 20 m3 or in a

bathroom or shower room.

Windows and permanent vents should therefore not be blocked or removed without first consulting a Corgi gas installer.

Failure to install appliances correctly is dangerous and could lead to prosecution.

7

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Contents Instructions for Safe and Proper USE IntroductionOUT of the WAY of Children Installation of the Appliance Instructions for the installerThis rating plate must never be removed Electrical connectionVentilation requirements Connecting to natural and LPG gas Adaptation to Different Types of GAS Replacement of nozzles on the hobLPG G30/G31 28/37 mbar Burner and nozzle characteristics table Mod cmArrangement of the burners on the hob Mod cm Burners Final Operations Mounting the rear top skirtboard where applicableRegulation of the hob burner minimum level for natural gas Regulation of the hob burner minimum level for LPGWall fixing Front control panel Description of ControlsVariable Grill Knob Instructions for the userLighting of the hob burners Practical advice for using the hob burnersUSE of the HOB Diameter of the vessels to be used on each burner Operation of the grill + rotisserie USE of the OvenUse of the electric grill How to use the grill Using the rotisserie in cookers with maxi ovenStorage compartment Using the pIzza function only on some modelsPrecautions for using the pizza plate Electronic Programmer only on Equipped Models Clock adjustmentSemiautomatic cooking Automatic cookingSwitching off the alarm Adjusting alarm volumeCancellation of set data End of cookingAccessories on Request Available AccessoriesCleaning of the hob components Cleaning and MaintenanceCleaning stainless steel and enamelled versions Door glass Cleaning of ovenReplacement of light bulb Extraordinary MaintenanceRemoving the door Oven door seal

SSA91MFX1, SSA91MFA1, SSA91MFX, SSA91MFA, SSA91MFP1 specifications

The Smeg SSA91MFP1, SSA91MFA, SSA91MFX, SSA91MFA1, and SSA91MFX1 are part of Smeg's innovative line of built-in ovens that marry modern technology with Italian design. Known for their stylish aesthetics and superior performance, these ovens provide a range of features that cater to the needs of contemporary cooking enthusiasts.

One of the standout features of these ovens is their multifunction capabilities. With various cooking modes including fan-assisted, conventional baking, grilling, and a dedicated pizza function, users can easily prepare a wide array of dishes, from perfectly risen cakes to evenly cooked pizzas. The fan-assisted cooking option distributes heat evenly throughout the oven, ensuring consistent cooking results regardless of the dish being prepared.

The Smeg ovens also incorporate advanced Titan enamel interiors, making them not only easy to clean but also resistant to high temperatures and stains. This feature ensures longevity and maintains the oven's aesthetic appeal even after prolonged use. They also come equipped with a removable inner glass door, allowing for seamless cleaning and maintenance.

Furthermore, these models boast a user-friendly digital display that provides precise control over temperature settings and cooking times. The intuitive interface is designed to make cooking as effortless as possible, helping both amateur cooks and seasoned chefs achieve restaurant-quality results at home.

Safety is another key consideration in the design of these ovens. They feature a cooling fan that helps keep the exterior temperature down, ensuring that it is safe to touch during cooking. Additionally, the ovens are equipped with a child lock function and a timer to prevent accidental operations, making them ideal for family homes.

In terms of energy efficiency, the SSA91MFP1, SSA91MFA, SSA91MFX, SSA91MFA1, and SSA91MFX1 models are designed to consume lower energy without compromising on performance. They carry energy ratings that reflect their commitment to environmentally friendly operation.

The elegant aesthetic of these ovens aligns with the Smeg philosophy of combining functionality with beautiful design. Available in multiple finishes including stainless steel, black, and white, they can seamlessly integrate into any kitchen decor, enhancing the visual appeal of the space.

In conclusion, the Smeg SSA91MFP1, SSA91MFA, SSA91MFX, SSA91MFA1, and SSA91MFX1 built-in ovens are a perfect blend of innovation and style. With their multifunction capabilities, energy efficiency, and user-friendly features, these ovens elevate the cooking experience, making them an essential addition to any modern kitchen. Whether you are baking, grilling, or roasting, Smeg ensures that you will do so with confidence and flair.
Top Page Image Contents