Smeg KLVS52X, KLVS50EB, KLVS51NE instruction manual Before starting a washing program make sure that

User instructions

TABLE FOR CERTIFICATION BODIES
Reference standard	EN 50242
Reference program	(*) Selector on P4
Load	12 place-settings
Type of detergent	B
Amount of detergent	30 g
Rinse aid setting	Depending on the model 3/4 or 4/6

 Washing programs

The dishwasher is equipped with a control panel and an 3-FIGURE DISPLAY (6), described in chapter "1. Description of the controls", from which it is possible to carry out all the power switch- on, switch-off and programming operations.

Before starting a washing program make sure that:

•The water supply tap is open.

•The correct amount of detergent has been added to the dispenser.

•The baskets have been correctly loaded.

•The spray arms are able to rotate freely and without obstruction.

•The dishwasher door is securely closed.

HALF-LOAD FUNCTION (available in all programs except the soak program)

This function is recommended for loads of up to 6 place-settings, and cuts down on the use of water and electricity. It is controlled by the HALF LOAD button (4) and allows washing in the upper basket only.

IMPORTANT: at the end of the program remember to deactivate the function to ensure the next wash is not also carried out in half load mode by mistake.

A cutlery basket can be placed in the upper basket, while the lower basket must be left empty.

CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of water will only reach the upper basket.