Smeg KS60-3T, KS60-2 instruction manual Installation and hook-up, For free-standing models only

Page 14

Installation instructions

2. Installation and hook-up

Remove the polystyrene basket retainers.

Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance. To ensure stability, install integrated or built-under dishwashers only under continuous worktops, and screw them to the adjacent units. To facilitate the installation procedure, the intake and drain hoses can be positioned in any direction; make sure that the hoses are not kinked, crushed or pulled too tightly. Make sure to tighten the locking ring-nut once the pipes have been placed in the direction required. A hole at least 8 cm in diameter is required to allow the power supply cable and pipes to pass.

Level the appliance on the floor using its adjustable feet. This operation is essential for ensuring correct operation of the dishwasher.

Building-in a dishwasher underneath a ceramic hob is absolutely forbidden.

A dishwasher can be built-in underneath a conventional hob provided there is no break in the kitchen worktop, and the dishwasher and hob are installed and secured correctly, so that no hazards are generated.

For free-standing models only

-Installing a hob on top of a free-standing dishwasher is absolutely forbidden.

-If the appliance is not built-in and is therefore accessible on one side, the door hinge area must be covered for safety reasons (injury hazard). The covering fixtures are available as an accessory from specialist dealers or the After-Sales Service.

-To build in the dishwasher, the special kit must be purchased from authorised dealers or the After-Sales Service.

Some models are equipped with only one adjustable foot at the rear, which can be adjusted by turning the screw on the lower front part of the appliance.



Page 13 Page 15
Image 14
Page 13 Page 15
Contents Guide for Using the Dishwasher and the Washing Programs Contents Description of the controls Front panelConsumption Table for Certification Bodies Cancelling the Current ProgramWashing programs Before starting a washing program make sure thatChanging the Program To Save on ENERGY! … and Protect the EnvironmentEND of Cycle Removing the DishesAdjusting the Water Softening System Water Hardness TableFor Cleaning Dishwashers Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation and hook-up For free-standing models onlyDrain Connection Connecting to the Water SupplyWater supply connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordWhen Cleaning and Maintaining the Appliance For Great Britain onlyUsing the water softening system Operating instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent Products General warnings and recommendations Make Sure that the items being washed are dishwasher-safeUser instructions Using the baskets EN 50242 Standard Loads for Certification BodiesLower Basket Loading the Lower BasketCutlery Basket Upper BasketLoading the Upper Basket Adjusting the Upper Basket Pull-out versionCleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Filter Unit Fill the rinse aid dispenser Shut off the water supply tapIf the program fails to start, check that If the dishes are not being cleaned properly, check thatReconnect the water intake hose and open the tap again If water remains inside the dishwasher, check thatIf the dishes fail to dry or remain dull, check that If there are visible traces of rust inside the tank135 145

KS60-2, KS60-3T specifications

The Smeg KS60-3T and KS60-2 are two impressive refrigerator models that epitomize the brand's commitment to combining style, functionality, and innovation. Designed for those who appreciate both aesthetics and practicality in their kitchen appliances, these models deliver a top-notch user experience.

One of the standout features of the Smeg KS60-3T and KS60-2 is their spacious interior. Both refrigerators offer ample storage solutions with adjustable shelving, flexible door bins, and dedicated compartments that cater to various food items and their unique storage needs. The design ensures that everything from large platters to small jars can be neatly organized.

In terms of technology, these models are equipped with Smeg’s advanced cooling system. This technology guarantees a consistent temperature throughout the fridge, thus maintaining the freshness of food items for longer periods. The Total No Frost feature prevents ice build-up, making maintenance significantly easier and eliminating the hassle of manually defrosting the appliance. This not only saves time but also increases efficiency by ensuring that the cooling system operates at peak performance.

Another remarkable characteristic of the Smeg KS60-3T and KS60-2 is their energy efficiency. These refrigerators are designed to consume less electricity, which is not only cost-effective for the user but also environmentally friendly. With energy ratings that often exceed standard requirements, they are designed to minimize energy consumption while maximizing performance.

The aesthetic appeal of these models cannot be overlooked. With Smeg’s iconic retro design, they serve as a statement piece in any kitchen. Available in a variety of colors and finishes, including pastel shades and classic stainless steel, they are sure to complement different interior styles, from modern to vintage.

Additional features include smart temperature control, which allows users to manage different temperature settings for various compartments, ensuring optimal storage conditions for fruits, vegetables, dairy, and meats. Moreover, the refrigeration units are equipped with LED lighting that not only saves energy but also provides clear visibility, making it easier to locate items even when the fridge is full.

In conclusion, the Smeg KS60-3T and KS60-2 models stand out for their blend of high-end technology, user-friendly features, and stunning design. They are perfect for anyone looking to enhance their kitchen experience while keeping food fresher for longer.
Top Page Image Contents