Smeg EN instruction manual Setting the Washing Program and Switching on

User instructions

SETTING THE WASHING PROGRAM AND SWITCHING ON

To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most appropriate program according to dish type and degree of soiling.

After using the table to identify the most appropriate washing program:

•press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;

•keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired program illuminates;

•close the door; after about 2" the program will start. While it is in progress, the relative LIGHT will flash (indicating that the program is being executed).

	PROGRAMME,		LOAD CROCKERY	PROGRAM	DURATION	CONSUMPTION
NUMBER & SYMBOL			AND CUTLERY	PROGRESS	MINUTES	WATER	POWER
					(2)	LITRES	KWh (2)
						(1)
1		RINSE	Pans and dishes for	Cold rinse	45'	9	0,90
				Rinse at 70°C
			rinsing and drying.
				Dry
				Cold prewash
2			Delicate dishes with	Wash at 45°C	75'	16	1,15
		DELICATE		Cold rinse
			normal dirt.
				Rinse at 70°C
				Dry
				Cold prewash
			Pans and dishes with	Wash at 50°C
3		AUTO		Wash at 65°C	***	***	***
			normal dirt, even with
		60-70		Cold rinse
			dried-on residues.
				Rinse at 70°C
				Dry
				Cold prewash
			Dishes with normal	Wash at 50°C
4		BIO (*)	dirt, even with dried-	Cold rinse	180’	**	**
		EN 50242
			on residues.	Rinse at 62°C

Dry

(*)Reference program as per EN 50242 standard.

(**)See energy label.

(***)When the "AUTO 60-70" program is selected, the dishwasher recognises the

type of dirt and automatically adjusts the washing parameters as appropriate.

(1)Average power consumption with the softener set on level 2..

(2)The cycle duration and power consumption may vary according to the water and room temperatures, and the type and amount of dishes.

11