Smeg DWI614 manual Troubleshooting Minor Problems

Page 24

User instructions

TROUBLESHOOTING MINOR PROBLEMS

In some cases it is possible to remedy minor problems by referring to the following instructions:

If the program fails to start, check that:

the dishwasher is connected to the electrical power supply;

there is no power failure;

the water tap is open;

the dishwasher door is properly closed.

If water remains inside the dishwasher, check that:

the drain hose is not kinked;

the drain siphon is not obstructed;

the dishwasher filters are not clogged.

If the dishes are not being cleaned properly, check that:

the correct amount of detergent has been added;

there is regenerating salt inside the special container;

the dishes are being loaded correctly;

the selected program is suitable for the dish types and their degree of soiling;

all the filters are clean and positioned correctly;

the spray arm nozzles are not obstructed;

there is no object obstructing the rotation of the spray arms.

If the dishes fail to dry or remain dull, check that:

there is rinse aid inside the special container;

the rinse aid dispenser setting is correct;

the detergent used is of good quality and has not lost its effectiveness (for example, through incorrect storage, with the box left open).

If the dishes show signs of streaking, staining, etc., check that:

the rinse aid dispenser setting is not too high.

If there are visible traces of rust inside the tank:

the tank is made of steel, and therefore any rust marks are due to external elements (fragments of rust from the water pipes, pots, cutlery, etc.). Special products are commercially available t o remove such marks;

check that the amount of detergent being used is correct. Certain detergents can be more corrosive than others.

check that the cap of the salt container is securely closed, and that the water softening setting is correct.

If after following the above troubleshooting instructions the problem persists, call the nearest After- Sales Centre.

WARNING: any operations performed on the appliance by unauthorised persons are not covered by the warranty and shall be paid for by the user.

45

Image 24
Contents Dishwasher Contents Safety instructions Safety and operating instructionsAquastop Models Installation and hook-up Connecting to the Water SupplyWater supply connection Electrical connection Drain ConnectionDescription of the controls Upper panelInformation display Switching OFF Delaying the ProgramAnnulling the Program in Progress Modifying the ProgramTable of Programs Washing programs HALF-LOAD Function certain models onlyRemoving the Dishes Sliding Facing Panel for fully integrated models onlyMoving the Facing Panel Using the water softening system Adjusting the Water Softening SystemOperating instructions Electronic Setting Setting Water Hardness RegenerationSwitch Setting Performed every cycleUsing the rinse aid and detergent dispensers Water Hardness Table SettingAdjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent User instructions General warnings and recommendations Using the baskets Lower BasketLoading the Lower Basket Loading examplesCutlery Basket Upper Basket Adjusting the Upper Basket Loading the Upper Basket Pull-out version Push-button versionCleaning and maintenance Cleaning the Water Intake FilterCleaning the Spray Arms Cleaning the Orbital Version Spray ARMCleaning the Filter Unit Prolonged DisuseTroubleshooting Minor Problems Troubleshooting Fault598 Vorrichtung für die Einstellung der Spannung der Türfedem