Smeg PL60XME instruction manual Installation and hook-up, Water supply connection

Page 6

Installation instructions

2. Installation and hook-up

Remove the polystyrene basket retainers. Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance. To ensure stability, install integrated or built-under dishwashers only under continuous worktops, and screw them to the adjacent units. To facilitate the installation procedure, the intake and drain hoses can be positioned in any direction; make sure that the hoses are not kinked, crushed or pulled too tightly. Make sure to tighten the locking ring-nut once the pipes have been placed in the direction required. A hole at least 8 cm in diameter is required to allow the power supply cable and pipes to pass.

Level the appliance on the floor using its adjustable feet. This operation is essential for ensuring correct operation of the dishwasher.

Installing a hob on top of a free-standing dishwasher is absolutely forbidden. Building-in a dishwasher underneath a ceramic hob is absolutely forbidden.

A dishwasher can be built-in underneath a conventional hob provided there is no break in the kitchen worktop, and the dishwasher and hob are installed and secured correctly, so that no hazards are

generated.

For free-standing models only: if the appliance is not built-in and is therefore accessible on one side, the door hinge area must be covered for safety reasons (injury hazard).

The covering fixtures are available as an accessory from specialist dealers or the After-Sales Service.

Some models are equipped with only one adjustable foot at the rear, which can be adjusted by turning the screw on the lower front part of the appliance.

2.1 Water supply connection

Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance.

The dishwasher must always be connected to the water system with new hoses; old or used hoses must never be reused.



Page 5 Page 7
Image 6
Page 5 Page 7
Contents Dishwasher Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation and hook-up Water supply connectionConnecting to the Water Supply Electrical connectionDrain Connection Description of the controls Front panelSetting the Washing Program SequenceCancelling the Current Program Washing programsTable for Certification Bodies Changing the Program To Save on ENERGY! … and Protect the EnvironmentEND of Cycle Removing the DishesUsing the rinse aid and detergent dispensers Operating instructionsAdding the Rinse AID Adjusting the Rinse AID Dispenser Setting Adding the DetergentUser instructions General warnings and recommendations User instructions Using the baskets Lower BasketLoading the Lower Basket Cutlery Basket Upper BasketAdjusting the Upper Basket Loading the Upper BasketCleaning and maintenance Cleaning the Water Intake FilterCleaning the Spray Arms Cleaning the Filter Unit Prolonged DisuseBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that Technical Data 135 145

PL60XME specifications

The Smeg PL60XME is a perfect blend of aesthetics, innovation, and functionality. This freestanding gas cooker is designed with the modern kitchen in mind, enhancing both cooking performance and kitchen aesthetics. With its sleek silver finish, it adds an elegant touch to any culinary space while providing reliable cooking capabilities.

One of the standout features of the Smeg PL60XME is its versatile cooking options. This model is equipped with four gas burners, including a powerful triple crown burner that delivers an impressive 4.0 kW of power, perfect for rapid boiling and searing. The burners are organized for optimal space usage, allowing multiple dishes to be prepared simultaneously without crowding.

Incorporating advanced technology, the Smeg PL60XME offers an easy-to-use electronic ignition system that ensures hassle-free lighting of the burners. Safety is a priority with this model, as it comes with flame failure devices that automatically shut off the gas supply if the flame goes out, providing peace of mind during cooking.

The oven in the Smeg PL60XME is equally impressive, boasting a generous capacity that allows for large meals or multiple dishes to be cooked at once. The oven features a range of cooking functions, including conventional, fan-assisted, and grill settings, giving users the flexibility to choose the perfect cooking method for different recipes. The easy-clean enamel interior makes maintenance straightforward, helping to keep the appliance in top condition with minimal effort.

Moreover, this cooker is designed for energy efficiency, boasting an A energy rating. This feature not only helps in reducing energy bills but also in minimizing the environmental impact. The sturdy stainless steel construction ensures durability and longevity, making it a worthwhile investment for any home chef.

The Smeg PL60XME also pays attention to user comfort with its ergonomic control knobs and a clear LED display, making it easy to monitor cooking times and temperatures.

In summary, the Smeg PL60XME is an impressive kitchen appliance that combines stylish design with high-tech features. Its powerful burners, spacious oven, and commitment to safety and efficiency make it an ideal choice for both novice cooks and seasoned chefs looking to elevate their culinary experience.
Top Page Image Contents