JBL HTI6, HTI8 Cut the drywall, Able to swivel into place, Speaker Wires Place the frame assembly

Page 6

Remove the grille from the speaker frame.

≥1/2"

Determine the correct speaker		Cut the drywall.
location. Note: Always allow at
least one-half inch between a
wall stud and the speaker cutout
or the locking tabs will not be
able to swivel into place.


Connect the	speaker	wires	Place the frame assembly	Screw down each of the three
to the speaker.			in the wall.	Phillips head screws. The locking
				tabs will swivel into place and
				secure the unit to the rear surface
				of the drywall.

Replace the metal grille.

Image 6

Contents Home Theater In-Wall Series HTI6, HTI8 and HTI6CCar or office JBL Consumer Products One pair of speakers with grilleModels HTI6, HTI8 as Rear Speakers E a K E R P L a C E M E N TFront Speakers Model HTI6C in CeilingE a K E R C O N N E C T I O N S InstallationWire Length Connection TipsFrom Determine the correct Cut the dry wall Connect the speaker wiresI S T I N G C O N S T R U C T I O N Speaker locationAble to swivel into place Speaker Wires Place the frame assemblyCut the drywall To the speaker WallTroubleshooting W C O N S T R U C T I O NI N T I N G T H E S P E a K E R A M E a N D G R I L L E Specification S