User instructions
TABLE FOR CERTIFICATION BODIES |
|
|
Reference standard |
| EN 50242 |
|
|
|
Reference program |
| (*) ECO program |
|
|
|
Load |
| 9 |
|
|
|
Type of detergent |
| B |
|
|
|
Amount of detergent |
| 30 g |
|
|
|
Rinse aid setting |
| Depending on the model 3/4 or 4/6 |
START PROGRAM
To start the dishwasher, press the START/PAUSE button (4) for a few seconds, until
the light of the first phase of the selected program starts to flash (confirmation beep).
As the program runs, the PHASES/PROGRAM lights (8) will indicate the current cycle status:
Prewash
Wash
Rinse |
| The light | of the phase in progress will flash, while | |
|
|
| the lights of previous and subsequent phases remain on. | |
|
| Dry | ||
|
| |||
|
| N.B. during execution of programs which do not | ||
|
|
| ||
|
|
| ||
|
|
| include a | prewash, the first PHASES/PROGRAM light |
(8)will remain off.
END PROGRAM
When the program finishes, a buzzer sounds briefly and all the PROGRAM PHASES lights (8) flash. Press any of the SELECTION PROGRAMS buttons (2), stops the light flashins, and the dishwasher is now ready to perform a new cycle; opening and shutting the door or switching the appliance off and on has the same effect.
INTERRUPTION OF A PROGRAM
In order to interrupt a running program it is necessary:
•press the START/PAUSE button (4), the light of the current phase goes out;
•keep the button pressed until the PROGRAM PHASES lights (8) come on (confirmation buzzer).
14