Smeg STA645Q manual Only run the soak program with half loads

User instructions

		PROGRAMME,		LOAD CROCKERY	PROGRAM	DURATION		CONSUMPTION
	NUMBER & SYMBOL			AND CUTLERY	PROGRESS	MINUTES		WATER	POWER
						(2)		LITRES (1)	KWh (2)
1			SOAK	Pans and dishes	Cold prewash	15'		6	0,03
				awaiting
				a further wash
				Wash immediately	Wash at 45°C	80'
2					Cold rinse			12	1,00
			LIGHT	after use for dishes
					Rinse at 68°C	60’	(3)
				with light dirt
					Dry
				Wash immediately	Wash at 50°C	180'
3			ECO (*)		Cold rinse			(**)	(**)
				after use for dishes
			EN 50242		Rinse at 66°C	80’	(3)
				with normal dirt
					Dry
					Cold prewash
4			NORMAL	Dishes	Wash at 65°C	120'		17	1,30
					Cold rinse
				with normal dirt	Rinse at 68°C	80’	(3)
					Dry
					Prewash at 45°C
				Very dirty pans	Wash at 70°C
			ULTRA
5						140'
			CLEAN	and dishes (except	2 cold rinses	100’	(3)	20	1,72
			(***)	delicate items)	Rinse at 70°C

Dry

Only run the soak program with half loads.

The RAPID CYCLE (6) and DELAYED START (8) options cannot be used with the soak program.

(*)Reference program as per EN 50242 standard. (**) See energy label.

(***)The "ULTRA CLEAN" program terminates with an anti-bacteria rinse that ensures a further reduction in the bacteria level. If the temperature falls during this stage of the program (e.g. because the door is opened or due to a power blackout), the program lights (2) flash to warn that the anti-bacteria effect is not guaranteed.

(1)Average power consumption with the softener set on level 2.

(2)The cycle duration and power consumption may vary according to the water and room temperatures, and the type and amount of dishes.

(3)With RAPID CYCLES (6) option active.

The washing cycle will not take place if the dishwasher door is left open or not properly closed.

11