Smeg DD409S manual Water supply connection, Connecting to the Water Supply, Drain Connection

Page 19

Installation instructions

2.1 Water supply connection

Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance. The dishwasher must always be connected to the water system with new hoses; old or used hoses must never be reused.

CONNECTING TO THE WATER SUPPLY

Connect the intake hose to a cold water supply with ¾” gas thread, inserting the filter A supplied with the dishwasher. Take care to screw the hose firmly into place with your hands and then complete by tightening about ¼ of a turn with pliers.

In dishwashers equipped with the ACQUASTOP device, the filters is already fitted inside the threaded ring.

The dishwasher can also be connected to a hot water supply not exceeding 60°C. Supplying the appliance with hot water cuts down the washing time by approximately 20 minutes, but slightly reduces its effectiveness. Make the connection to the domestic hot water supply using the same procedure described for connecting to the cold water supply.

DRAIN CONNECTION

Insert the dishwasher’s drain hose into a drain pipe having a diameter of at least 4 cm, or alternatively, place it inside the kitchen sink using the plastic support provided, taking care not to crush or excessively bend the hose. It is important to prevent the hose from coming loose and falling. For this purpose, the plastic support is equipped with a hole for tying it to the wall or water tap.

The free end should be positioned at a height of between 30 and 100 cm, and should never be submerged in water. If a horizontal drain extension hose is used (for a maximum of 3 m) the drain hose can be placed at a maximum height of 85 cm from the ground.



Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dishwasher Contents Front panel Description of the controlsUser instructions For AAA models only see energy label Lighting Washing programsStart Program ProgrammingInterruption of a Program END ProgramTo Change a Program Annulling a Program Removing the Dishes To Save on ENERGY! … and Protect the EnvironmentWater Hardness Table Adjusting the Water Softening SystemCode Phases Lights Description TroubleshootingFor Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Installation and hook-up Installation instructionsWater supply connection Connecting to the Water SupplyDrain Connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent User instructions General warnings and recommendations User instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLower Basket Cutlery Basket Loading the Lower BasketLoading the Upper Basket Upper BasketAdjusting the Upper Basket Cleaning the Water Intake Filter Cleaning and maintenanceCleaning the Spray Arms Cleaning the Filter Unit Cleaning the Spray ARM, Travelling VersionGeneral Warnings and Recommendations for Correct Maintenance If the dishes are not being cleaned properly, check that Technical Data 115 125 135 145 155

DD409S specifications

The Smeg DD409S is a modern built-in double oven that combines style, functionality, and advanced technology to meet the needs of avid home cooks and culinary enthusiasts. With its sleek stainless steel design, the DD409S not only enhances the aesthetic of any kitchen but also boasts a range of features that make cooking an enjoyable and efficient experience.

One of the standout features of the Smeg DD409S is its capacity. The double oven design provides ample cooking space, allowing you to prepare multiple dishes simultaneously. Whether you're roasting a turkey in one oven while baking a cake in the other, this appliance is designed to accommodate large meals and the demands of busy households.

Technologically, the DD409S integrates a user-friendly digital interface that includes an electronic programmer. This feature allows for precise timing and temperature control, ensuring that your culinary creations come out perfectly every time. The oven also includes a range of cooking modes, including traditional cooking, fan-assisted heat, and various grilling options, providing versatility for all your cooking needs.

Another significant characteristic of the Smeg DD409S is its pyrolytic cleaning function. This innovative technology makes cleaning the oven a hassle-free task. By heating the oven to extremely high temperatures, food residues and grease are reduced to ash, which can then be easily wiped away, saving you time and effort.

The DD409S is also equipped with Smeg's signature Thermaflow technology, which ensures an even distribution of heat throughout the oven cavity. This results in consistent cooking and eliminates hot spots, making it easier to achieve the desired results when baking and roasting.

Additionally, safety features such as triple-glazed door glass and cold door technology reduce heat transfer to the outer surfaces, ensuring safety during operation. The appliance is designed with energy efficiency in mind, catering to modern eco-conscious consumers who want to save energy without sacrificing performance.

Overall, the Smeg DD409S is an impressive double oven that perfectly balances style, practicality, and cutting-edge technology. Its combination of ample cooking space, versatile modes, easy cleaning, and safety features makes it an excellent choice for anyone looking to elevate their kitchen experience.
Top Page Image Contents