Smeg BLV1NE instruction manual Adding the Rinse AID, Adjusting the Rinse AID Dispenser Setting

Page 25

User instructions

ADDING THE RINSE AID

The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining; it is automatically added to the water during the final rinse cycle, from the container situated on the inner side of the door.

To add rinse aid:

Open the door.

Rotate the container cap anticlockwise by ¼ of a turn and remove it.

Add the rinse aid until the container is full (approximately 140 cc). The optical level indicator on the side of the cap should be completely obscured. Refill the rinse aid when the optical level indicator becomes clear again, or when the rinse aid warning light illuminates.

Replace the cover and turn it in a clockwise direction.

Use a cloth to remove any spillage of rinse aid which might lead to the formation of excess foam.

ADJUSTING THE RINSE AID DISPENSER SETTING

The dishwasher is factory set for medium water hardness. However it possible to change the setting by turning the dispenser’s selector to the desired position: the amount of rinse aid dispensed is proportional to the selector position.

To adjust the rinse aid setting, rotate the dispenser cap through a quarter turn in an anticlockwise direction and remove it.

Then use a screwdriver to rotate the rinse aid selector to the desired position.

Replace the cap, turning it clockwise.

The amount of rinse aid must be increased if the washed dishes appear dull or feature circular stains.

If, on the other hand, the dishes are sticky or have white streaks, it is necessary to reduce the rinse aid setting.



Image 25
Contents Guide for Using the Dishwasher and the Washing Programs Contents Upper panel Description of the controlsProgram Delay Button on some models only Setting the Washing Program and Switching on 110’ Washing programs Cancelling the Current ProgramTable for Certification Bodies Changing the ProgramExtra Programs Selecting Half Load WashOption Button Delaying the ProgramWater Hardness Table Adjusting the Water Softening SystemRemoving the Dishes END of CycleFault Description TroubleshootingTurbine flow-regulator malfunction For Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Installation and hook-up Installation instructionsWater supply connection Connecting to the Water SupplyDrain Connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendationsUser instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLower Basket Loading the Lower Basket Cutlery Basket Loading the Upper Basket Upper BasketAdjusting the Upper Basket Cleaning the Water Intake Filter Cleaning and maintenanceCleaning the Spray Arms Prolonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that