Smeg BLV1VE Washing programs, Table for Certification Bodies, Cancelling the Current Program

Page 7

User instructions

TABLE FOR CERTIFICATION BODIES

 

 

 

 

 

Reference standard

 

EN 50242

 

 

 

 

Reference program

 

BIO

 

 

 

 

Load

 

14 place-settings

 

 

 

 

Type of detergent

 

B

 

 

 

 

Amount of detergent

 

35 g

 

 

 

 

Rinse aid setting

 

5/6

1.2 Washing programs

Before starting a washing program make sure that:

•The water supply tap is open.

•The correct amount of detergent has been added to the dispenser.

•The baskets have been correctly loaded.

•The spray arms are able to rotate freely and without obstruction.

•The dishwasher door is securely closed.

CANCELLING THE CURRENT PROGRAM

•To cancel the currently selected program, open the door and hold down the PROGRAM SELECTION (3) button for a few seconds until the indicator lights for programs 4 and 5 illuminate simultaneously.

•Close the door.

•After approximately 1 minute the dishwasher will advance to the end of cycle.

CHANGING THE PROGRAM

To change the program in progress, simply open the door and select a new program. When the door is closed the dishwasher will automatically select the new program.

20

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Guide for Using the Dishwasher and the Washing Programs Contents Upper panel Description of the controls Program Delay Button on some models only Setting the Washing Program and Switching on 110’ Changing the Program Cancelling the Current ProgramWashing programs Table for Certification BodiesExtra Programs Selecting Half Load WashOption Button Delaying the ProgramWater Hardness Table Adjusting the Water Softening SystemRemoving the Dishes END of CycleFault Description TroubleshootingTurbine flow-regulator malfunction For Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Installation and hook-up Installation instructionsWater supply connection Connecting to the Water SupplyDrain Connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendationsUser instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLower Basket Loading the Lower Basket Cutlery Basket Loading the Upper Basket Upper BasketAdjusting the Upper Basket Cleaning the Water Intake Filter Cleaning and maintenanceCleaning the Spray Arms Prolonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that
Top Page Image Contents