Dolby PRO Logic NON-DIGITAL Line Level

DOLBY® DIGITAL OR DTS®

(OR OTHER DIGITAL SURROUND MODE) CONNECTION

DOLBY PRO LOGIC (NON-DIGITAL) – SPEAKER LEVEL

Use this installation method for Dolby Digital, DTS or other dig- ital surround processors:

Use either the left or right line- level input jack for the Low- Frequency Effects channel; it doesn’t matter which one you choose.

IMPORTANT: Make sure that the LFE/Normal toggle switch

∞is in the “LFE” position. This will bypass the sub- woofer’s normal low-pass filter, reducing the possibility of signal degradation and more accurately reproducing the program materials. However, if your receiver is passing a full- range signal through its sub- woofer output, place the tog- gle switch in the “Normal” position, which will activate the low-pass filter and protect

the subwoofer from possible damage. Connect this jack to the LFE output or subwoofer output on your receiver or amplifier. Connect each speaker to the corresponding speaker terminals on your receiver or amplifier.

Make sure that you have con- figured your surround sound processor for “Subwoofer On.” Also, remember to configure your receiver for 5.1-, 6.1- or 7.1-channel operation as appropriate.

Use this installation method for Dolby Pro Logic applica- tions (not Dolby Digital, DTS or other digital processing), where the receiver/processor does not have a subwoofer output, or a volume-controlled preamp (line-) level output:

Connect your receiver or amplifier’s front left and right speaker terminals to the left and right terminals on the subwoofer that are marked “Speaker Level In.” Connect the left and right terminals on the subwoofer that are marked “Speaker Level Out” to

DOLBY PRO LOGIC® (NON-DIGITAL) – LINE LEVEL

the corresponding terminals on

Use this installation method for Dolby Pro Logic applica- tions (not Dolby Digital, DTS or other digital processing), where the receiver/processor is equipped with a subwoofer output, or a volume-controlled preamp (line-) level output:

Use RCA-type interconnects to connect the line-level subwoofer outputs on your receiver or amplifier to the line-level inputs on the sub-

woofer. IMPORTANT: Make sure that the LFE/Normal toggle switch ∞ is in the “Normal” position. This will activate the subwoofer’s low- pass filter, protecting the sub- woofer from possible damage and enabling it to operate most efficiently by reproducing only the low-frequency materials that it is best at handling.

NOTE: If your receiver or amplifier only has one sub-

woofer output jack, then you will need to use a Y-connector(not included). Plug the male end of the Y-connector into your receiver or amplifier’s subwoofer output jack, and connect each of the two female ends to separate RCA- type interconnects. Finally, plug the RCA-type intercon- nects into the line-level inputs on the subwoofer.

Connect each speaker to the corresponding speaker terminals on your receiver or amplifier.

Make sure your receiver or processor is correctly config- ured to indicate that the sub- woofer is “On.”

Note for advanced users: If your receiver/processor has a built-in low-pass crossover filter for the subwoofer output, you may switch the LFE/ Normal toggle switch to the “LFE” position to bypass the subwoofer’s internal crossover.

the back of your front left and right speakers.

Connect your receiver or amplifier’s center, surround and surround back speaker terminals to the corresponding terminals on the back of your center and surround speakers.

L8400P specifications

The JBL L8400P represents a significant addition to the world of high-performance subwoofers, offering an exceptional combination of power, precision, and versatility. Designed by the renowned audio equipment manufacturer JBL, the L8400P delivers a robust low-frequency performance that enhances any audio setup, making it ideal for home theaters, music enthusiasts, and professional audio applications.

One of the standout features of the L8400P is its impressive power output. With a powerful 300-watt RMS amplifier coupled with a peak output of up to 600 watts, this subwoofer is capable of delivering deep, impactful bass that can fill any room. This power allows it to reproduce low frequencies with authority, enhancing the overall sound experience, whether it's booming cinematic explosions or subtle musical notes.

The L8400P utilizes advanced technologies that contribute to its exemplary performance. It features JBL's patented PolyPlas cone technology, which is designed to provide a lightweight yet stiff diaphragm. This construction results in reduced distortion and improved clarity, ensuring that the subwoofer can handle dynamic audio content with ease. Additionally, the progressive spider design allows for greater excursion and control, which translates to superior bass response.

In terms of design, the JBL L8400P is both stylish and functional. It boasts a robust enclosure that is engineered to minimize resonance, thereby enhancing the overall sound quality. The sleek finish and modern look make it a fitting addition to any home audio setup, blending seamlessly with various interior designs.

Connectivity options are another strong point for the L8400P. It features both line-level and speaker-level inputs, allowing it to integrate easily with a wide range of audio systems, including receivers and amplifiers. The subwoofer also comes equipped with adjustable phase and crossover controls, enabling users to fine-tune the output to match their specific listening environments.

Finally, the JBL L8400P is designed with user convenience in mind. It includes a range of settings to optimize performance based on the room acoustics, making it adaptable for different spaces. Whether used for music, movies, or gaming, this subwoofer promises to elevate the auditory experience, making it a valuable addition for those seeking deep, resonant bass in their audio systems. With its fusion of technology, performance, and aesthetic appeal, the JBL L8400P stands out as a top choice for audiophiles and casual listeners alike.