Smeg CE6IMX manual Operation Activating temperature, 12.5.5Thermal protection glass-ceramic hob

Page 22

Instructions for the User

Operation

Activating temperature

Fan turns on at low speed

50 °C

Fan turns on at high speed

60 °C

Fan returns to low speed

55 °C

Fan turns off

45 °C

Operating power reduced from Power to 9

76 °C

Reduction of power of a point for every cooking zone

85 °C

Turning off all the cooking zones

90 °C

Switching on again of the cooking zones at reduced power

85 °C

Normal operation of all the cooking zones

80 °C

 

 

Every intervention of this type will be identified on the cooking hob with a light on the power display.

12.5.5Thermal protection glass-ceramic hob

Every cooking zone has a device that constantly measures the temperature. If the temperature surpasses certain values, the device will activate certain functions to lower the temperature and allow the glass-ceramic hob to continue to work correctly. Below is a table with the operations that are activated automatically and the relative start temperature:

Operation

Activating temperature

Operating power reduced from Power to 9

250 °C

Reduction of the power of a point

280 °C

Switching off the cooking zone

300 °C

Return of the power to the set value

250 °C

 

 

Every intervention of this type will be identified on the cooking hob with a light on the power display.

Take care not to spill sugar or sweet mixtures on to the hob when hot. Never place materials or substances which may melt (plastic or aluminium foil) on the hob. If this occurs, promptly switch off and remove the molten material with the scraper provided while the cooking zone is still warm to prevent it from being damaged. Failure to instantly clean the glass-ceramic hob could lead to encrustations which are impossible to remove once the hob has cooled down.

Important! Beware of childrenas the residual heat indicator lights are out of sight to them. In fact, even after having been turned off, the cooking zones remains hot for a certain period of time. Make sure that children never touch the hob.

Do not leave metal objects on the hob: they could get very hot.

12.5.6Keep Warm Function

The purpose of the keep warm function is to regulate the temperature of the bottom of the cookware to approximately 65°C. This allows for keeping food warm at the ideal power level, as well as heating slowly. The maximum duration of the keep warm function is limited to 2 hours. The keep warm function is between [0] and [1] and is indicated with appropriate symbols on the cooking zones.

51

Image 22
Contents Index Precautions for USE Plate Must Never be RemovedRecycling Instructions OUR Environment Policy Intended USE Safety PrecautionsNever Attempt to Repair the Appliance Yourself Getting to Know Your Cooker General DescriptionAvailable Accessories Before InstallationAccessories available on request Instructions for the User Description of the Controls on the Front Panel Main Oven Functions Selection Knob PT2 Main Oven Temperature Selection Knob PT1HOB Control Knob First use Using the Main OvenSetting the current time Selecting a function in manual cookingModifying the data set Programmed cooking procedures10.4.1Semiautomatic cooking 10.4.2Automatic cookingModifying the data set during cooking Cooking with selection of a recipeAutomatic cooking with selection of a recipe Making permanent changes to a recipe Table of predefined recipes Secondary menu Cooking in the Oven Description of the selected functionsHints on Using the Accessories Cooking Hints and TipsCooking tables Using the HOB Cooking zones180 mm Zone number Zone Diameter Power consumed 145 mmTotal power consumed 210 mm12.5.3Cooking hob lock-out 12.5.1Cookware detector signal12.5.2Residual heat 12.5.4Circuit board thermal protection12.5.5Thermal protection glass-ceramic hob Operation Activating temperature12.5.6Keep Warm Function Cleaning and Maintenance Removing the door Extraordinary MaintenanceChanging the light bulb Removing the door sealOven does not heat up What to do ifOven display is completely off Controls do not respondInstalling the Appliance Electrical connectionPositioning and levelling the appliance depending on model