Timer on some models only, Modifying the data set

Instructions for the user

7.2.8 Timer (on some models only)

Some models are equipped with a 1 to 99-minute cooking timer.

To use the timed cooking, first set the power level by following the instructions given in paragraphs “7.2.2 Single Cooking Zones” and “7.2.3 Dual Cooking Zones”.

Now, with the hob NOT locked out (if it is locked out, press the key to enable the functions), press the symbol .

Between the symbols and of the first active cooking zone, a LED light will turn on to indicate that the minutes to be set will refer to operation of that particular zone.

The automatic operation minutes of the cooking zone can be increased or decreased by using the and keys beside .

After 5 seconds have gone by since the last time it is pressed, the timer will start and the cooking zone will operate until the display above the symbol reaches 0.

At this point the cooking zone will automatically turn off.

It is also possible to use the timed cooking function on more than cooking zone at the same time. Once the timer is set on the first zone, press key to shift the timer controls over to the next active

zone (the LED light between the symbols and of the second active cooking zone will be activated) and then set the cooking duration as previously described.

When the timed cooking is active on several cooking zones at the same time, the display between the symbols and of the cooking zone will alternatively turn on and at the same time the minutes display found on the symbol will show the time remaining for the zone with the LED light on.

7.2.9 Modifying the data set

During timed cooking, each single pressure on the and symbols increases or reduces the power of the cooking zone.

To change the remaining time of a zone, you have to press key until the LED light in the cooking zone turns on. Now it will be possible to change the operating time by working with the symbols and of the timer.

7.2.10 Residual heat

Each cooking zone is equipped with a residual heat warning device. After any zone is switched off, a flashing “”may appear on the display. This warns that the cooking zone concerned is still very hot. Cooking can be restarted while the is flashing; proceed as described in points “7.2.2 / 7.2.3”.

7.2.11 Control circuit board thermal protection

If the cooking zones cause overheating of the internal electronic circuit board, the heat will be switched off automatically. This switches off power to the front zones, and the letters and flash alternately on the power leds. If the circuit board does not cool down, power to all the cooking zones is switched

off, and the power leds display the text . Cooking can be resumed once the temperature has dropped below the safety threshold.

7.2.12 Operator Error

If the user makes a mistake when using the push-buttons, an appears on the power display; it will remain there as long as the user continues to press the button being used incorrectly.

7.2.13 Switching off the cooking zones

The cooking zones are switched off when the operational power display indicates 0. The zone will automatically deactivate 5 seconds after the display shows 0.

If the cooking zones are hot, the blinking residual heat “H” will appear after they are switched off.

APL2640TC specifications

The Smeg APL2640TC is a stylish and innovative built-in 60 cm dishwasher that brings efficiency and elegance to any kitchen. Known for its combination of advanced technology and Italian design, the APL2640TC offers an optimal cleaning experience while maintaining a compact footprint ideal for modern living spaces.

One of the standout features of the Smeg APL2640TC is its capacity, accommodating up to 13 place settings. This makes it suitable for both daily use and larger family gatherings. Its adjustable racks and cutlery tray provide flexible loading options, allowing users to maximize space and organize dishes effectively.

Equipped with 10 different washing programs, including quick wash, eco-friendly cycles, and intensive modes, the dishwasher caters to a variety of washing needs. The Quick wash program is particularly advantageous for busy households, reducing overall wash times without compromising on cleaning performance. The Eco mode is designed to use minimal water and energy while still delivering excellent results, making it a great choice for environmentally-conscious users.

The APL2640TC incorporates Smeg's unique BioWash technology, which utilizes advanced filtration and water flow systems to enhance cleaning efficiency. This technology ensures that even stubborn stains and dried-on food are effectively removed, leaving dishes spotless. Additionally, the dishwasher features a powerful steam clean option that sanitizes and refreshes your utensils and crockery, providing peace of mind.

Noise reduction is another important characteristic of this dishwasher, operating at a whisper-quiet level of just 44 dB. This makes it ideal for open-plan living spaces or homes where tranquility is desired during operation.

The design of the Smeg APL2640TC is as impressive as its functionality, featuring a classic stainless steel finish that complements various kitchen aesthetics. Its easy-to-use control panel, complete with a digital display, simplifies program selection and provides useful information regarding cycle progress.

For added convenience, the Smeg APL2640TC is equipped with delay start options, allowing users to set the dishwasher to run at a time that suits their schedule, which is perfect for taking advantage of off-peak energy rates. This blend of advanced technology, practical features, and sleek design makes the Smeg APL2640TC a premium choice for anyone looking to upgrade their kitchen appliances with a high-performance dishwasher.