Oven Maintenance
Cleaning |
| Light Replacement |
MAKE SURE THAT THE OVEN IS UNPLUGGED BEFORE CLEANING THE OVEN.
DON'T USE ABRASIVE CLEANING PRODUCTS.
OUTSIDE
1.Clean the outside surface with a neutral detergent, warm water and dry it with a damp cloth.
2.Avoid water from entering the oven ventilation holes.
INSIDE
1.Clean the oven walls with a damp cloth after each use.
2.Avoid water from entering the ventilation holes in the oven's interior.
3.If some time has passed by since the last cleaning and the oven's interior is dirty, place a glass of water on the tray and switch on the oven for 4 minutes on the highest setting. Moisture will form on the oven walls which will be easily cleaned.
4.The tray can be washed with regular dish washing detergent or in the dishwasher.
DOOR, DOOR SEAL, AND OVEN FRONT
1.These parts should always be clean, especially the contact surface between the door and the oven front, to prevent microwave leakage.
2.Use neutral detergent, warm water and dry the surface with a soft cloth.
In some models the light may be replaced by the user. These ovens have a lid on the
To replace the light, do as follows:
1.Unplug the oven;
2.Remove the lid from the light compartment;
3.Replace the light bulb for a new one (25 W);
4.Replace the lid.
WARNING: in the models without the lid to replace the light bulb, this should be done by the Technical Assistance Service because special tools are required.
11