appears on the display panel. Within 5 seconds of choosing the Bass mode, press the 
AUDIO CONTROL 2 button to decrease the bass response, or the 
AUDIO CONTROL button to increase it as desired. The level will be shown on the display panel from a minimum BAS
NOTE: Base and Treble cannot be adjusted while Equalizer function cu is in ROCK, CLAS or POP mode.
5TREBLE CONTROL
To adjust the treble level (Equalizer function inactive), first select the Treble mode by pressing the SEL button 3 so the TRE indication appears on the display panel. Within 5 seconds of choosing the Treble mode, press the AUDIO CONTROL button
2to decrease the treble response or the 
AUDIO CONTROL button to increase it as desired. The level will be shown on the display panel from a minimum TRE
6LEFT/RIGHT BALANCE CONTROL
To adjust the 
AUDIO CONTROL button 2 to adjust the stereo balance to the left channel speakers or the 
AUDIO CONTROL button to adjust it to the right channel speakers. The balance position will be shown on the display panel from BAL L16 (full left) to BAL R16 (full right). When the volume level between the left and right speakers is equal, BAL 00 will be shown on the
display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
7FRONT/REAR FADER CONTROL
To adjust the 
AUDIO CONTROL button 2 to adjust the 
AUDIO CONTROL button to adjust it to the front speakers. The fader position will be shown on the display panel from FAD R16 (full rear) to FAD F16 (full front). When the level between the front and rear speakers is equal, FAD 00 will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
8LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Press the button momentarily to activate this feature; the LOUD indication will appear on the display panel. Pressing the button again momentarily will deactivate the feature (the LOUD indication will disappear from the display panel).
9AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the volume from the system (MUTE will appear blinking on the display panel). Pressing the button again or adjusting the AUDIO CONTROL 2 level will return to the volume level setting in use before the Mute function was activated. During disc play, pressing this button will mute disc audio; however, disc play will continue and not be paused. During this time, the 
indication will remain on the display panel to show that a disc is still loaded in the unit.