Trouble-shooting Guide
During the service, the user come across troubles appearing during the operation of the appliance. We are listing some of troubles, which in most
cases result from improper handling of the appliance and can be eliminated by yourself.
Trouble | Cause |
|
|
|
|
|
|
|
|
The appliance is connected | No electricity in the wall socket. |
|
|
|
to power supply, but won’t | The appliance is not switched on. |
| Switch it on (green light is on) | |
work |
|
| ||
|
|
|
| |
| The thermostat knob was set |
| Turn the knob to the right. | |
| under min (1). position (towards |
| ||
|
|
|
| |
| left) and the appliance was |
|
|
|
| switched off. |
|
|
|
The appliance operates | The lid was opened for too long. |
|
|
|
continuously. | Thermostat knob is on too cold |
| Set the knob towards |
|
| position. |
|
| |
|
| min (1) position. |
| |
|
|
|
| |
| Insufficiently cooled condenser. |
| Remove the dust from the condenser and | |
|
|
| check if theres is adequate air circulation | |
|
|
| behind the appliance. |
|
| The switch is in position for discontinuous operation (yellow light is on). | |||
Vibrations or too much noise. | Inadequate position. |
| Take care for suitable | pavement. |
| Appliance in direct contact with |
| Move the freezer away. | |
| wall or next units. |
| ||
|
|
|
| |
Outer surfaces are wet. | Wet room. |
| Put the appliance in dry room. | |
|
|
| ||
| Badly isolated floor. |
| Displace the appliance. | |
| Longer period of hot and humid weather. |
| ||
Excessive formation of frost. | The lid of the appliance opens too frequently or the lid is left open too long. | |||
| There is stored too big quantity of | insufficiently cooled down foods. | ||
| Lid does not shut well. |
| Check if two styrofoam | elements are |
|
|
| removed and if packs eventually prevent | |
|
|
| the lid to be closed. |
|
Red light is on. | The appliance has not reached the set temperature. |
| ||
| Too big quantity of insufficiently cooled down foods raises the inside | |||
| temperature. As soon as the foods cool down to set temperature the light goes | |||
| off. |
|
|
|
Interior Light Bulb Replacement
Before you replace the light bulb, disconnect the appliance from the mains.
Remove the plastic lid and replace the burnt out bulb with a new one (E14, 15 W).
Do not throw the bulb among organic garbage.
Light bulbs belong to durables therefore
our
WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WHICH DO NOT
INFLUENCE ON THE APPLIANCE OPERATION.
44 | Instructions for Use |