Transport instructions, Disposal, Appliance setup

en	en

Transport instructions

The appliance should be transported only in upright position.

The packing as supplied must be intact during transportation.

If the appliance is transported in the horizontal position, it must be placed vertically and left in this position for 4 hours before taking into operation.

The appliance must be protected against rain, moisture and other atmospheric influences. The manufacturer assumes no liability if safety instructions are disregarded.

Disposal

Make the appliance unusable immediately. Pull out the mains plug and cut the power cable. Remove or destroy snap or latch locks before disposing of the appliance. In this manner you prevent children from locking themselves in and endangering their lives.

Appliance setup

•Do not operate your appliance in a room where the temperature is likely to fall below 10 °C at night and/or especially in winter. At lower temperatures the appliance may not operate, resulting in a reduction in the storage life of the food.

•The climate class rate of your appliance is given on the rating label located inside the appliance. It specifies the appropriate operating ambient temperatures as explained below.

Climatic class	Ambient temperatures
SN	+10 °C to 32 °C
N	+16 °C to 32 °C
ST	+18 °C to 38 °C
T	+18 °C to 43 °C
SN-ST	+10 °C to 38 °C
SN-T	+10 °C to 43 °C

Location

Only place the appliance in dry rooms which can be ventilated.

Avoid direct sunlight or direct heat sources such as a stove or a heater.

If this cannot be avoided, the following minimum distances should be maintained:

From cookers	:3.00 cm
From heaters	:3.00 cm
From cooling devices	:2.50 cm

•Make sure that sufficient room is provided around the appliance to ensure free air circulation.

Fit the two plastic wall spacers supplied with the appliance rotating 1/4 turn to the condenser at the back of the appliance (Fig. 7).

•The appliance should be located on a level surface. The two front feet can be adjusted as required. To ensure that your appliance is standing upright adjust the two front feet by turning clockwise or counter-clockwise, until the product is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise.

Electrical connections

Warning

This appliance must be grounded.

•Check whether the power type and voltage in your region corresponds to the one stated on the rating label inside the appliance.

•The electrical safety of the appliance is only assured when the grounding system in the house is installed in accordance with regulations.

•When placing the appliance, do not let the power cable get stuck under it; otherwise the cable will be damaged.

•Ensure that the plug remains readily accessible. Do not use a multiple adapter bar or an extension cable.

•The electrical specifications of your appliance is given on the rating label located inside the appliance.

•Route power cable to allow easy connection and disconnection after installation.

•A contact separator should be used if the power cable is not accessible. (for built-in models)

CV 270 AP, CV 270 A specifications

The Smeg CV 270 A and CV 270 AP are remarkable appliances that embody Italian design and functionality, catering to modern kitchens. Renowned for their elegance and robust features, these models serve as trendsetters in the world of kitchen equipment.

The CV 270 A model stands out with its sleek stainless-steel exterior, which not only contributes to its aesthetic appeal but also ensures lasting durability. The CV 270 AP variant, on the other hand, comes with a contemporary finish that adds a touch of sophistication to any culinary space. Both models share a range of distinct features and technologies that enhance user experience and efficiency.

One of the main highlights of these ovens is their advanced cooking technology. Equipped with multifunctional cooking programs, the CV 270 A and CV 270 AP offer diverse cooking methods including traditional, fan-assisted, and grilling options. This versatility allows home chefs to experiment and perfect their culinary creations with ease. The inclusion of a pizza function demonstrates Smeg's commitment to authentic Italian cuisine, enabling users to achieve perfectly crafted pizzas right from their kitchen.

Furthermore, the ovens feature a large capacity, making them suitable for families and those who frequently entertain guests. An easy-to-navigate digital interface provides precise control over cooking settings and times, contributing to better meal preparation. The incorporation of a programmable timer means users can set their meals to cook at specific times, perfect for a busy lifestyle.

Energy efficiency is another key characteristic of the CV 270 A and CV 270 AP. Both models are designed to reduce energy consumption without compromising performance. This focus on sustainability aligns with Smeg's dedication to producing environmentally friendly appliances.

Cleaning is often a concern with kitchen equipment, but Smeg addresses this with easy-to-clean enamel interiors that minimize food residue buildup. The addition of a telescopic shelf system enhances user convenience, allowing effortless access to dishes while reducing the risk of spills.

Overall, the Smeg CV 270 A and CV 270 AP ovens boast a captivating combination of design, advanced cooking technologies, energy efficiency, and user-friendly features, making them an outstanding choice for any modern kitchen. With these ovens, cooking becomes an enjoyable and stylish experience, reinforcing Smeg’s philosophy of blending functionality with elegant design.