Installation Instructions

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Activate panel fold-down, and remove the detachable front panel, if it is attached to the chassis, by grasping the release latch on the middle underside of the panel and pulling the panel assembly straight out. The mounting plate will return to the upright position within 3 seconds. Slide the mounting sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be “on”). If unit does not operate, re-check all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

7. Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for the unit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully un-snap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION: DO NOT EXCEED M5 X 8 MM MAXIMUM SCREW SIZE. LONGER SCREWS MAY TOUCH AND DAMAGE COMPONENTS INSIDE THE CHASSIS.

4.Wire the new radio to the vehicle as per step 4 above.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

-2-

P-965 specifications

The Audiovox P-965 is an innovative multimedia player that has captured the attention of audio enthusiasts and tech-savvy consumers alike. Combining sleek design with robust functionality, the P-965 serves as an all-in-one portable entertainment solution.

One of the standout features of the Audiovox P-965 is its high-resolution display. Boasting a vibrant screen, it enables users to enjoy vivid visuals while watching videos or navigating through their music library. The intuitive user interface allows for seamless navigation, making it easy to find and play favorite tracks or videos.

Sound quality is a hallmark of the P-965, thanks to its advanced audio technologies. Equipped with a powerful audio processor, the device supports a wide range of audio formats, ensuring that users can enjoy their music the way it was intended. The built-in equalizer provides further customization, allowing audiophiles to fine-tune sound settings to match their personal preferences.

In terms of connectivity, the Audiovox P-965 is designed to accommodate modern lifestyles. It features Bluetooth technology, enabling wireless streaming from compatible devices. Additionally, users can connect the player to external speakers or headphones via the headphone jack for a more immersive listening experience.

Battery life is another key characteristic of the Audiovox P-965. With an efficient power management system, the device can deliver hours of playback on a single charge. This makes it ideal for on-the-go entertainment, whether commuting, traveling, or simply relaxing at home.

The P-965 supports various multimedia formats, allowing users to play a wide array of content types, from music and podcasts to videos and audiobooks. This versatility is enhanced by the ample storage capacity, enabling users to save a significant library of media without the need for constant deletion or re-loading.

Durability is also a focus of the Audiovox P-965. Constructed with high-quality materials, it is built to withstand daily wear and tear. Its compact design makes it easily portable, fitting comfortably in bags or pockets.

In summary, the Audiovox P-965 is a well-rounded multimedia player that combines advanced audio and video capabilities with user-friendly features and robust design. Whether you are an audio enthusiast or merely seeking a reliable device for everyday use, the P-965 is a compelling choice in the saturated portable entertainment market.