Double heating, Main Oven Thermostat Knob

Instructions for the user

Double heating

The circle next to each knob indicates the cooking zone it controls. To heat the inner cooking zone, turn the knob to the desired position (1 to 9).

To heat both the inner and outer cooking zones, turn the knob to or ; and then release. The knob will thus return to 9. To adjust heating intensity, rotate the knob anticlockwise to the desired position. To return to heating of the inner cooking zone only, set the knob back to 0 and then turn to the desired position (1 to 9). To switch off, return knob to 0.

MAIN OVEN THERMOSTAT KNOB

Selection of cooking temperature is carried out by turning the knob clockwise to the required temperature, between 50° and 250°C.

The tell-tale light comes on to indicate that the oven is Warming up. When it goes out it means that the required temperature has been reached..

Intermittent going on and off of the light means that oven temperature is being constantly maintained at the programmed level.

The oven is switched on by turning the knob clockwise to any one of the following functions except the oven light:

NO FUNCTION SET	GRILL ELEMENT +
	VENTILATION (SPIT)
OVEN LIGHT (NO ELEMENT	GRILL ELEMENT (SPIT)
ENGAGED)
VENTILATED HEATING	DEFROSTING
ELEMENT + VENTILATION	(NO HEATING ELEMENT
50 ⎟ 250°C	ENGAGED)