Summit ALF-620, SCR-600, SWC-6G, FF8 Temperature Selection, Mechanical Thermostat Instructions

Page 8

Page 8

TEMPERATURE SELECTION

Felix Storch, Inc.

SUMMIT APPLIANCE DIV.

YOUR APPLIANCE MAY HAVE A MECHANICAL (DIAL) OR DIGITAL THERMOSTAT.

INSTRUCTIONS FOR BOTH FOLLOW:

MECHANICAL THERMOSTAT INSTRUCTIONS

The refrigerator is controlled with a thermostat knob located inside the unit, towards the upper right-hand corner. Turn the knob clockwise from the STOP (0) position toward the higher numbers for colder temperatures.

Temperature Controls

•Higher settings on the knob (higher numbers) mean lower temperatures (colder) in all compartments of the appliance. On the coldest settings temperatures in some spots of the interior of the appliance may even drop below 32°F. Use higher thermostat settings only when required or recommended. When the ambient temperature is normal, we recommend the medium setting.

•Changes of the ambient temperature affect temperature in the interior of the appliance so choose a correct setting of the thermostat knob, depending on your ambient conditions.

•In the STOP (0) position the appliance does not operate (the cooling system is switched off), yet power supply is not interrupted (the light is on, when you open the refrigerator door).

•The temperature in the refrigerator and in the freezer compartment also depend on how often you open the door.

-In all small refrigerators and freezers without interior fans, temperatures are coldest near the bottom, and occasionally near the rear. Place contents accordingly. It is best not to operate these units mostly empty. If temperatures are erratic, try putting some water bottles or freezer packs inside to create a load for the compressor.

DIGITAL THERMOSTAT INSTRUCTIONS

If you find that it is necessary to change the temperature setting for your digital thermostat controlled appliance, please refer to the following instructions. The front panel of the thermostat is illustrated here:

melting snowflake

snowflake

Up & Down arrows

To see the SETPOINT:

Push and immediately release the SET key -the display will show the SET point value. Wait 5 seconds and the probe value will display again.

To change the SETPOINT:

Push and hold the SET key for more then 3 seconds to change the set point value; The value of the set point will be displayed, and the “snowflake” LED will start blinking.

To change the SET value:

Push the up or down arrows to the desired setting; the new setting will be memorized after 15 seconds, provided no other keys are pushed.

Note: The minimum and maximum range of your thermostat is preset and locked by us; so it cannot easily be accidentally moved between freezer and refrigerator temperatures. To reset this range lock, either call us or find information on our website under troubleshooting.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents USE and Care Guide Appliance Safety Installation Instructions UnpackingChoosing the Right Place Appliance USE Reversing the Door Swing Selected modelsAppliance Operation Base Grill some models onlyCleaning Your Frost-Free Refrigerator Appliance CareTemperature Selection Mechanical Thermostat InstructionsKeypad Lock optional on most models Alarm Instructions alarms are optional on most models Integrated Frames are Optional on ALL Models FF6- FF7- FF8-SCR600 AL7 Series, with no freezer compartment FS62 Series of all-freezers Before Calling for SERVICE… If You Need Replacement PartsTroubleshooting Your refrigerator or freezer will not operateWarranty

AL-750, ALF-620, FF8, SWC-6G, SCR-600 specifications

The Summit SCR-600, SWC-6G, FF8, ALF-620, and AL-750 are advanced devices that showcase the latest in audio and communication technologies. Each model presents specialized features tailored to meet various user needs, making them valuable tools in both personal and professional settings.

The Summit SCR-600 stands out with its compact design and impressive audio clarity. This device incorporates cutting-edge noise-canceling technology, ensuring that background disturbances are minimized during calls or recordings. The SCR-600 is equipped with an intuitive interface that allows users to navigate its features easily. It also boasts a long-lasting battery life, making it suitable for extended use in various environments.

The SWC-6G is engineered for seamless connectivity, supporting multiple wireless protocols, including Bluetooth and Wi-Fi. This versatility enables users to connect effortlessly to various devices, enhancing productivity and collaboration. Its robust build quality ensures durability, while its sleek design makes it aesthetically pleasing. The SWC-6G also features a high-definition audio processor that delivers immersive sound experiences, whether for calls, music, or multimedia.

The FF8 offers a unique blend of portability and performance. Designed for on-the-go users, this lightweight device is fitted with advanced audio codecs that provide excellent sound quality even in challenging environments. Its quick charging capability ensures that users can rely on it for uninterrupted usage throughout their day. Additionally, the FF8's ergonomic design facilitates comfortable handling during extended use.

The ALF-620 focuses on versatile functionality, functioning seamlessly as both a speaker and a microphone. This dual capability makes it an ideal choice for presentations, video conferences, or casual listening. The ALF-620 uses advanced acoustic engineering to optimize sound distribution, ensuring that audio is clear and balanced in any space. It is also equipped with smart voice recognition, allowing users to control functions with simple voice commands.

Lastly, the AL-750 is renowned for its exceptional sound amplification. This device is engineered for larger environments and gatherings, making it a perfect fit for events or group discussions. The AL-750 incorporates advanced equalization settings, enabling users to customize their audio experience. Its rugged design ensures reliability, making it suitable for outdoor and demanding uses.

In conclusion, the Summit SCR-600, SWC-6G, FF8, ALF-620, and AL-750 represent the forefront of audio technology. Each device offers unique features, ensuring that there is a suitable option for every user’s needs. From exceptional sound quality to versatile functionality, these devices are designed to enhance communication and listening experiences in various contexts.
Top Page Image Contents