Requirements

Do not remove any safety, warning, or product information labels from your ice maker.

Before you begin

Preparing the Ice Maker for use before you plug the ice maker in to a power supply, be sure to let it stand upright for at least 24 hours to allow the compressor’s oils to settle.

Unpacking the Ice Maker

Carefully remove the packaging materials. Remove any shipping tape and glue from your ice maker before using. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your icemaker. Check to make sure the ice scoop and hoses are included. If any parts are missing, please contact our customer service. Put the ice maker on a level and flat surface away from direct sunlight and other sources of heat such as a stove, furnace, radiator, etc. The appliance must be positioned so that the power plug is accessible.

Installation Requirements

The ice maker has been designed for free-standing installation which will allow you to install the unit in almost any place you desire. Please make sure to follow the instructions for clearance, water and electrical requirements.

Clearance and Environment Requirements

•Choose a well-ventilated area with temperatures above 50°F and below 90°F. Operation outside these temperatures may result in lowered production or may cause other adverse effects.

•This unit MUST be installed in an area protected from the elements, e.g., wind, rain, water spray or drips. The icemaker should not be located next to ovens, grills or other high heat sources.

•The unit should be located on a firm and level surface that is able to support the ice maker’s total weight with water.

•There must be at least 4 inches of space around the back and sides of the unit for proper air circulation.

Water Requirements

•Only use potable water or water suitable for drinking.

•The temperature of the water should be between 51°F and 90°F.

•Change the water in the water reservoir every 24 hours to ensure a reasonable hygiene level. Note: The add water light uses an electronic sensor that may not detect purified, filtered, reverse osmosis, or distilled water. You may need to add a pinch of salt to the water to increase the mineral content.

Electrical Requirements

Read all safety precautions listed at the beginning of this manual. It is recommended that a separate circuit serving only your ice maker be provided. Use receptacles that cannot be turned off by a switch or pull chain.

The ice maker is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-pronged and grounding-type wall receptacle providing 110-120V, 60Hz, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility of the customer to have a properly grounded, 3-prong wall receptacle installed by a certified electrician.

FIM-450HS specifications

The Whynter FIM-450HS is a powerful and efficient ice maker designed for those who need a reliable source of ice for various purposes. Whether for entertaining guests, filling coolers for outings, or ensuring a steady supply for commercial use, this innovative appliance delivers top performance in a compact design.

One of the standout features of the Whynter FIM-450HS is its production capacity. The unit can produce up to 44 pounds of ice per day, ensuring you will never run out of ice when you need it most. The ice maker features a large storage bin that can hold up to 29 pounds of ice, allowing for significant quantities to be stored at once. This makes it ideal for parties, barbecues, and any event where cold beverages are required.

The Whynter FIM-450HS operates using advanced compressor technology, which not only enhances ice production efficiency but also ensures that the ice is made in a quick turnaround time. The unit can create a batch of ice in as little as 10 to 15 minutes, offering convenience for users who may need ice on short notice. Additionally, the machine produces bullet-shaped ice cubes that are perfect for chilling drinks without diluting their flavor, appealing to both home users and professional settings.

Another key characteristic of the Whynter FIM-450HS is its user-friendly control panel. It features simple LED indicators that provide information on ice production status and includes settings for adjusting the thickness of the ice cubes, allowing for customization based on personal preferences.

Portability is another highlight, as the machine is designed with a compact footprint, making it easy to fit into kitchens, bars, or outdoor areas. Its sleek stainless-steel exterior not only adds a modern touch but also ensures durability and easy maintenance.

The Whynter FIM-450HS incorporates an automatic shut-off feature, enhancing safety and energy efficiency by turning off the unit once the ice bin is full. This thoughtful design consideration reduces waste and keeps operating costs low, making it an environmentally friendly option.

In summary, the Whynter FIM-450HS is an exceptional ice maker that combines efficiency, capacity, and user-friendly features. Its advanced technologies ensure that whether for home use or business, you can enjoy a continuous supply of high-quality ice with minimal hassle.