SETUP/ Operation / Maintenance

Place your Ice Cream Maker on a level counter.

Make sure all Ventilation Openings (B) have a minimum clearance of 10” (25cm.) from surrounding walls and other appliances.

Before using your SNO Ice Cream Maker, remove the Bowl (C) and Churn (H) and wash in warm water. The Lid (E) and Motor Drive (G) are attached and should be cleaned with a damp cloth. Do not place any part in the dishwasher. Thoroughly dry the Bowl (C) inside and outside and the blade (H) into the Lid/ Churn motor assembly (E/G) and set aside.

Plug the Power Cord (K) into a standard electrical outlet (110/120V-60Hz).

With the Lid/Churn Motor Assembly (E/G) off, pour ingredients according to the selected recipe into bowl (C). Replace Lid/Churn Motor Assembly (E/G).

Turn the main power Switch (I) located at the rear of the appliance on. This turns on the cooling compressor and Timer Display Panel (J).

Next, set the required time. The Timer Display (J) will automatically display the time set from the previous batch. To change and set the time, press the yellow timer set switch. By pressing and releasing, single minutes can be set, pressing and holding the yellow timer set switch down, will advance the minutes quickly. The time can be set from 0-60 minutes. Recommended time is 25- 30 minutes. The previously set time may be changed by pressing the yellow timer set switch a second time within 6 seconds of the first setting.

Once the time has been set, press the Red Start/Stop Switch to start the Churn Blade (H).

When the set time has elapsed to “0” on the Timer Display (J), the buzzer will buzz 5 times alerting you that the ice cream is done. Press the Red Start/Stop Switch to stop the churn. Remove the Lid/Churn Motor Assembly (E/G) and check the ice cream. If it is ready shut the Main Power Switch (I) and remove the ice cream. Always use plastic or wooden utensils, never use metal to avoid damaging the Bowl (C).

The Yellow Timer Set Switch works as a timer only; it does not turn the churn or cooling motor “Off” automatically. Both must be turned “On” and “Off” manually.

If the ice cream needs more time, do not turn “Off” the Main Power Switch (I). Place the Lid/Churn Motor Assembly (E/G) in position, set the additional time required and press the Red Start/Stop Switch to start the churn.

If the Churn Motor (G) was not turned “Off” after the set time elapsed, the Churn Blade (H) will continue until the blade becomes stuck in the frozen ice cream. 30 seconds after being stuck, the buzzer will buzz and the Timer Display (J) will flash. After 5 minutes, the Churn Motor (G) will shut “Off” automatically preventing any damage to the motor. The buzzer and flashing display will continue.

To, reset the machine, press the Red Start/Stop Switch and turn “Off” the Main Power Switch (I). The churn blade and ice cream at this point will be frozen solid and will require defrosting before it can be removed. Be careful not to damage the removable bowl.

IC-2L specifications

The Whynter IC-2L is a remarkable portable ice maker that appeals to both home users and outdoor enthusiasts alike. This efficient appliance stands out due to its compact size, making it ideal for countertop placement in kitchens, RVs, and even during picnics. Its sleek design and stainless steel finish add an aesthetic touch that complements any setting.

One of the primary features of the Whynter IC-2L is its impressive ice production capability. This versatile machine can produce up to 28 pounds of bullet ice cubes per day. With a cycle time of just 10 to 15 minutes for each batch, it ensures a steady supply of ice, perfect for entertaining guests or cooling down drinks on hot summer days.

The IC-2L employs advanced compressor technology, which not only enhances its efficiency but also reduces energy consumption compared to traditional ice makers. This energy-efficient operation makes it an environmentally friendly choice for consumers looking to minimize their carbon footprint.

The user-friendly control panel allows for easy operation. Simply fill the water reservoir, choose your preferred size for the ice cubes, and start the production process. The machine features a built-in reservoir that can hold up to 2.2 liters of water, ensuring that users won't have to constantly refill the unit. Additionally, the transparent lid lets users monitor the ice production without interrupting the process.

Safety and convenience are further highlighted in this model through its automatic shut-off feature. When the ice bucket is full, or when the water reservoir is empty, the unit automatically turns off to prevent overflow and damage.

Another practical aspect of the Whynter IC-2L is its portability. Weighing just under 30 pounds, it is easy to transport, making it a great companion for camping trips or backyard parties. The noise level during operation is relatively low, ensuring that it won’t disrupt conversations or activities.

Overall, the Whynter IC-2L combines efficiency, convenience, and stylish design into a compact ice maker. Whether you're hosting a gathering, enjoying a day outdoors, or simply need extra ice for everyday use, this model stands out as a reliable choice that delivers on both performance and aesthetics.