Sub-Zero BI-48SD, BI-36R, BI-36U, BI-36F, BI-42S manual Important Note On glass door models, the edges

Page 13
Framed Panels
Framed Panels. If the thickness of the custom panels is less than 1/4" (6), they must be backed up with a sheet of shim material to build the total thickness to 1/4" (6). If the panel is thicker than 1/4" (6), a routed edge must be provided around the panel to ensure a proper fit. Refer to the illustrations.
IMPORTANT NOTE: On all framed models, routing, recessing or optional extended handles may be required on raised panels for finger clearance under the handle. Refer to the full-scale templates at the end of this guide.

13

subzerotrade.com

TRIM

REVEAL

1/4" (6) min

1/4" (6)

PANEL

MAIN FRAME

DOOR

TRIM

REVEAL

1/4" (6) min

ROUT TO 1/4" (6)

MAIN FRAME

DOOR

Framed

IMPORTANT NOTE: On glass door models, the edges of

Panels 1/4" (6) thick or less. Panels thicker than 1/4" (6).

the window cut-out will need to be finished, as they will

 

be exposed.

 

IMPORTANT NOTE: When installing two units in a side by

 

side application, refer to pages 30–31 for dual standard

 

installations. Be aware that rough opening dimensions are

 

different for this application.

 

Do not exceed the framed decorative panel dimen- sions. Exceeding dimensions could cause damage to the panels and the Sub-Zero unit.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents BUILT-IN Design Guide SUB-ZERO is a registered trademark of Sub-Zero, Inc New Built-In Model Series Built-In RefrigerationModel Number Key Built-In Design Options Built-In Design Options Over-and-Under Models Model Specifications All Refrigerator / All Freezer ModelsSide-by-Side Models Model SpecificationsInterior Capacity / Weight Model Specifications Door ClearanceCapacity / Weight Door ClearancePlanning Information Standard Installation Opening DimensionsOpening Width Electrical Requirements OperationLocation of water supply Framed Framed PanelsFramed Panel Requirements Important Note On glass door models, the edges Models BI-36R, BI-36RG and BI-36F Framed Panel SpecificationsModels BI-30U and BI-30UG Models BI-36U and BI-36UGModels BI-42S and BI-42SD Model BI-36SModels BI-48S and BI-48SD Grille Panel Requirements Optional Grille PanelOptional Partial Framed Panels Overlay Overlay PanelsOverlay Panel Requirements Panel assembly cross Panel assembly rear view Section Overlay Panel Specifications Overlay Panel 201/16 Flush Inset Flush Inset ApplicationFlush Inset Opening Widths Flush Inset Installation Opening DimensionsFlush Inset Panel Requirements Flush Inset PanelsIllus Flush Inset Panels Flush Inset Panel Specifications Flush Inset Panel 209/16 Dispenser Specifications Routing Detail Side panel dimensions Dual Installations Dual Installation Panel Requirements Dual InstallationsOpening Widths Dual Standard Installation Opening DimensionsFlush Inset Panels 26 3/16 Dual Flush Inset Installation Opening DimensionsDual Installations Illus Flush Inset Panel Specifications-Dual Installation Dual Wide Grille-Flush Inset Panels Dual Wide Grille-Overlay PanelsStandard Handle Lengths Built-In AccessoriesOverlay and Flush Inset Panel Thickness and Handle ProfileTOP View Overlay Panel Application-90 Door OpeningFlush Inset Panel Application-110 Door Opening Full Panel and Handle Profile-110 Door OpeningSub-Zero Products Limited Warranty Page Sub-Zero, Inc
Related manuals
Manual 40 pages 43.37 Kb Manual 2 pages 15.11 Kb

BI-36S, BI-36RG, BI-36UG, BI-42S, BI-48SD specifications

Sub-Zero, a renowned brand in luxury refrigeration, offers a suite of built-in models that redefine kitchen appliances with both functionality and elegance. Among their standout products are the BI-36R, BI-36U, BI-36F, BI-48S, and BI-48SD, each designed with unique features and advanced technologies.

The Sub-Zero BI-36R is a refrigerator model that exemplifies the balance of style and performance. It boasts dual refrigeration, which keeps fresh and frozen foods at optimal temperatures and humidity levels. The unit features an advanced air purification system that eliminates odors and harmful bacteria, ensuring food quality is preserved. A sleek stainless-steel finish complements its modern aesthetic, while customizable panel options allow for seamless integration into any kitchen design.

The BI-36U, the under-counter model, is perfect for smaller spaces or as an additional storage solution. Its compact design doesn’t compromise on features, offering similar dual refrigeration technology and an adjustable shelving system. Notably, it also includes a water filtration system, providing fresh drinking water and ice on demand.

For those prioritizing freezing capabilities, the BI-36F stands out. This dedicated freezer matches the superior insulation and sealing technology found in all Sub-Zero units, guaranteeing that food remains frost-free and retains nutrients. The BI-36F also includes a self-closing feature, which ensures that the door remains securely shut, further promoting energy efficiency.

The BI-48S and BI-48SD models elevate luxury with their larger capacities and sophisticated features. Both models provide dual refrigeration and advanced cooling technology, ensuring optimal preservation of various food items. The BI-48SD includes an integrated ice maker and dispenser, delivering convenience at your fingertips, while both units can accommodate extensive storage needs with adjustable shelving and elegant bin systems.

All of these models utilize Sub-Zero’s signature microprocessor controls, which enable precise temperature settings and energy efficiency. Moreover, these units are designed with an intuitive interface, allowing users to customize their refrigeration experience easily.

In conclusion, Sub-Zero’s BI-36R, BI-36U, BI-36F, BI-48S, and BI-48SD offer top-of-the-line features, cutting-edge technologies, and stylish designs suitable for any gourmet kitchen. Whether you’re looking for efficiency, space-saving options, or luxurious capabilities, there’s a Sub-Zero model that meets your needs.
Top Page Image Contents