Planning Information
Integrated Model 700BR
CABINETS |
25 |
(635) |
27 |
(686) |
TOP VIEW |
Installation without side panels.
CABINETS |
25 |
(635) |
27 |
(686) |
MINIMUM 5/8" (16) SIDE PANELS |
Installation with side panels.
CABINETS |
25 |
(635) |
54 |
(1372) |
TOP VIEW |
Installation of two units side by side.
CABINETS |
25 |
(635) |
27 |
(686) |
MINIMUM 5/8" (16) SIDE PANELS |
Installation at end of run.
I N S T A L L A T I O N O P T I O N S
The illustrations on this page show some typical installations and their dimension considerations. The depth dimension in the illustrations may vary depending on cabinet styles, treatment of counter- tops or other design options.
IMPORTANT NOTE: The depth of each Integrated unit is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635). Refer to the illustrations.
D U A L I N S T A L L A T I O N S
If two or more Integrated models are installed side by side where there is 2" (51) or less of space between the units, a heater kit is recommended— BBDUAL for two drawer units installed side by side or a drawer unit and a tall unit installed side by side. This optional component is available through your
Dimensions in parentheses are in |
|
millimeters unless otherwise specified. | 10 |