Dimensional Data ALT132DUT ALT232DUT | Traulsen RLT232DUT-FHS

Project	Quantity	Item #
Model Specified:		CSI Section 11400

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four

(4) adjustable 6" high stainless steel legs are included.

Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA	R/ALT132DUT	R/ALT232DUT
Net capacity cu. ft.	17.7 (501 cu l)	42.0 (1190 cu l)

Length - overall in.	24 (61.0 cm)	48 (121.9 cm)
Depth - overall in.	35 (88.8 cm)	35 (88.8 cm)
Depth - less handle in.	333⁄4 (84.4 cm)	333⁄4 (84.4 cm)
Depth - over body in.	32 (81.3 cm)	32 (81.3 cm)
Depth - door open 90° in.	543⁄4 (139.1 cm)	543⁄4 (139.1 cm)
Clear door width in.	185⁄8 (47.3 cm)	199⁄16 (49.7 cm)
Clear half-door height in.	271⁄2 (69.9 cm)	271⁄2 (69.9 cm)
Clear full-door height in.	575⁄8 (146.3 cm)	575⁄8 (146.3 cm)
Height - overall on 6" legs	831⁄4 (211.5 cm)	831⁄4 (211.5 cm)
RLT Net Wt. lbs.	360 (163 kg)	619 (280 kg)
ALT Net Wt. lbs.	320 (145 kg)	560 (254 kg)
No. Standard Shelves	3	6
Shelf area sq. ft.1	14.2 (1.3 sq m)	31.6 (2.9 sq m)
ELECTRICAL DATA

Voltage	115/60/1	115/60/1

Feed wires with Ground	3	3

Full load amperes	11.5	14.9
REFRIGERATION DATA
Refrigerant	R-404A	R-404A
BTU/HR H.P.2	1890 (1⁄2 HP)	3070 (3⁄4 HP)

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.

2= Based on a 90 degree F ambient and -20 degree F evaporator.

3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information on remote models, please refer to spec sheet 12-2.

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-404A refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor and a plenum effect blower coil. Two section models include a large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. One section models include an interior mounted ceiling coil and bottom mounted electric condensate evaporator. A 9' cord and plug is provided. Standard operating temperature is 0 to -5°F.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, Defrost Lockouts, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

Elevation -	Elevation -	Plan - R/ALT232DUT
R/ALT132DUT	R/ALT232DUT

One Section Models Equipped

With One NEMA 5-15P Plug

Plan - R/ALT132DUT

Two Section Models Equipped

With One NEMA 5-20P Plug

NOTE: Full load amps and plug style may vary depending on electrical options chosen and condensing unit employed.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.

Continued product development may necessitate specification changes without notice.

Part No. TR35765 (revised 1/07)		Section - R/ALT132DUT	Section - R/ALT232DUT

SECTION	TRAULSEN
SECTION	4401 BLUE MOUND RD.	FT. WORTH, TX 76106
1-11	PHONE 1 (800) 825-8220	FAX-MKTG. 1 (817) 624-4302
	Website: www.traulsen.com

ALT232DUT-FHS, RLT132DUT-FHS, ALT232DUT-HHS, ALT132DUT-FHS, ALT132DUT-HHS specifications

Traulsen is a well-known brand in the commercial refrigeration industry, recognized for producing high-quality and efficient refrigeration equipment. Among its impressive lineup are models like the RLT232DUT-HHS, RLT132DUT-HHS, RLT232DUT-FHS, ALT132DUT-HHS, and ALT132DUT-FHS. These units are designed to meet the rigorous demands of foodservice operations, ensuring safe food storage while maximizing space efficiency.

The RLT232DUT-HHS is a high-efficiency reach-in refrigerator that boasts a two-section design with stainless steel exteriors, ensuring durability and ease of maintenance. Its electronically-controlled refrigeration system maintains precise temperature levels while providing energy savings. The shelving is adjustable, allowing for flexible storage options, a vital feature for ever-changing stock levels.

The RLT132DUT-HHS, on the other hand, is a one-section model that offers similar durability and efficiency. With a compact footprint, it is perfect for establishments with limited space. It also features a self-closing door for energy conservation and a stay-open feature for easy access during busy service periods.

Shifting focus to the RLT232DUT-FHS, this model differs primarily in its top-mounted design, which optimizes refrigeration performance and maximizes usable interior space. The unit comes equipped with powerful refrigeration technology that not only maintains safe temperatures but also reduces the workload on the system, enhancing longevity and energy efficiency.

The ALT132DUT-HHS and ALT132DUT-FHS models offer versatility in food storage with their compact designs. The ALT series is notable for its advanced air circulation system, which ensures an even temperature distribution throughout the cabinet. This feature is crucial for maintaining food quality and safety.

All these models are equipped with user-friendly digital controls that allow for easy monitoring and adjustments of temperature settings. They also feature a robust construction with stainless steel interiors, making them both functional and aesthetically appealing in any kitchen setting.

In summary, the Traulsen RLT232DUT-HHS, RLT132DUT-HHS, RLT232DUT-FHS, ALT132DUT-HHS, and ALT132DUT-FHS models showcase a blend of advanced refrigeration technology, user-friendly features, and superior build quality. They cater to the needs of commercial kitchens while ensuring food safety and operational efficiency.

Specifications

Construction, Hardware and Insulation