Traulsen G31010 warranty Specifications, Dimensional Data, Electrical Data, Refrigeration Data

Page 2

Project

 

 

Quantity

 

Item #

Model Specified:

 

 

 

 

CSI Section 11400

 

 

 

 

 

 

 

 

Specifications

 

Construction, Hardware and Insulation

 

Refrigeration System

Cabinet exterior front, louver assembly and doors are constructed of 20 gauge

A top mounted, self-contained, balanced refrigeration system using R-404A

stainless steel. Cabinet sides (including returns), interior and door liners are

refrigerant is conveniently located behind the one piece louver assembly. It features

constructed of anodized aluminum. The exterior cabinet top, back and bottom are

an easy to clean front facing condenser, thermostatic expansion valve, air-cooled,

constructed of heavy gauge aluminized steel. A set of four (4) 6" high casters are

semi-hermetic compressor, large, high humidity evaporator coil located outside the

included.

 

 

 

food zone and a top mounted non-electric condensate evaporator. A 9' cord and

Doors are equipped with a gasket protecting metal door pan, removable plug

plug is provided. Standard operating temperature is 0 to -5°F.

 

 

cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide

Controller

hinges with stay open feature at 120 degrees. Hinges include a concealed switch to

The easy to use water resistant microprocessor control system is supplied standard.

automatically activate the interior incandescent lighting. Guaranteed for life, work

It includes a 3-Digit LED Display, and a Fahrenheit or Celsius Temperature Scale

flow door handles are mounted horizontally over recess in door which limits

Display Capability.

protrusion from door face into aisleways.

 

Interior

 

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.

Standard interior arrangements include three (3) epoxy coated wire shelves per

Anti condensate heaters are located behind each door opening.

 

section, mounted on shelf pins, installed at the factory. Shelves are full-width, and

Both the cabinet and door(s) are insulated with an average of 2" thick high density,

do not have any large gaps between them requiring the use of "bridge" or "junior

non-CFC, foamed in place polyurethane.

 

shelves."

Recommended load limit per shelf should not exceed 225 lbs.

 

 

 

 

Warranties

DIMENSIONAL DATA

G31010, G31011, etc.

 

 

Both a one year parts and labor warranty and a five year compressor warranty (self-

 

 

contained models only) are provided standard. An optional 2nd year extended parts

 

 

 

 

Net Capacity cu. ft.

69.1 (1958 cu l)

 

 

 

 

and labor warranty is also available.

 

 

 

 

Length Overall in.

76516 (193.8 cm)

 

 

 

 

Depth - Over Body in.

32 (81.3 cm)

 

 

 

 

 

 

 

 

 

 

Depth - W/Door Open 90° in.

5678 (144.5 cm)

 

 

 

 

Depth - Overall in.

35 (88.8 cm)

 

 

 

 

 

 

 

 

 

 

Clear Door Width in.

2118 (53.6 cm)

 

 

 

 

Clear Half Door Height in.

2712 (69.9 cm)

 

 

 

 

Clear Full Door Height in.

5758 (146.3 cm)

 

 

 

 

Number of shelves

9

 

 

 

 

 

 

 

 

 

 

Shelf area sq. ft.1

51.9 (4.82 sq m)

 

 

 

 

Height - Overall in.

8314 (211.5 cm)

 

 

 

 

ELECTRICAL DATA

 

 

 

 

 

 

 

 

 

 

 

Voltage

115/60/1

 

 

 

 

 

 

 

 

 

 

Feed Wires with Ground

3

 

 

 

 

 

 

 

 

 

 

Full Load Amperes

15.8

 

 

 

 

 

 

 

 

 

 

REFRIGERATION DATA

 

 

 

 

 

 

 

 

 

 

Refrigerant

R-404A

 

Elevation View

Plan View

BTU/HR - HP2

5220 (34 HP)

 

 

 

 

CARTON DIMENSIONS Domestic Crated Only

 

 

 

 

 

 

 

 

 

 

Length - Crated in.

91 (231 cm)

 

 

 

 

 

 

 

 

 

 

Depth - Crated in.

43 (109.2 cm)

 

 

 

 

 

 

 

 

 

 

Height - Crated in.

8312 (212.1 cm)

 

 

 

 

Volume - Crated cu. ft.

189 (5354 cu l)

 

 

 

 

 

 

 

 

 

 

WEIGHT DATA

 

 

 

 

 

 

 

 

 

 

 

Net Weight - Uncrated lbs.

690 (313 kg)

 

 

 

 

 

 

 

 

 

 

Gross Weight - Crated lbs.

870 (395 kg)

 

 

 

 

 

 

 

 

 

 

NOTES

 

 

 

 

 

NOTE: Figures in parentheses reflect metric equivalents.

1= Figure shown reflects the area of standard shelf compliment plus the additional storage area available on the cabinet bottom.

2= Based on a 90 degree F ambient and -10 degree F evaporator. For remote data please refer to spec sheet 13-2.

Equipped with one NEMA 5-20P Plug

REQUIRED CLEARANCES

In order to assure optimum performance, the condensing unit MUST have an adequate supply of air for cooling purposes. Therefore, the operating location must either have a minimum of 12” clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit. Clearance of at least 12” above is required in order to perform certain maintenance tasks.

Continued product development may necessitate specification changes without notice. Part No. TR35849 (revised 6/08)

Section View - All Models

NOTE: Freight charges are FOB destination for dock to dock delivery within the continental USA. Liftgate delivery charges are additional. For inside delivery charges, please consult factory.

SECTION

TRAULSEN

 

4401 BLUE MOUND RD.

FT. WORTH, TX 76106

4-4

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

Website: www.traulsen.com

Image 2
Contents Series Three V Storage Freezers/Self-Contained Standard Product FeaturesOptional Accessory Kits Weight Data SpecificationsDimensional Data Electrical Data

G31010 specifications

The Traulsen G31010 is a top-of-the-line refrigerator designed for commercial kitchens and food service operations, known for its reliability, durability, and innovative technology. As a part of Traulsen's line of high-performance refrigeration equipment, this model is specifically crafted to satisfy the rigorous demands of the food industry.

One of the standout features of the Traulsen G31010 is its robust construction. The refrigerator is designed with a stainless steel exterior and an aluminum interior, providing a sleek appearance while ensuring longevity and resistance to corrosion. This heavy-duty design not only enhances durability but also makes it easy to clean, a crucial aspect for maintaining hygiene in any kitchen environment.

The G31010 is equipped with state-of-the-art cooling technology, utilizing an environmentally friendly R-134A refrigerant. This refrigerant not only complies with global standards for reducing harmful emissions but also significantly enhances the efficiency of the cooling system. The refrigeration system is designed for rapid temperature recovery, ensuring that the unit maintains consistent temperatures even during peak usage hours.

Another key feature of the Traulsen G31010 is its digital temperature control system. This system allows for precision temperature adjustments, providing users with an easy and accurate way to manage food storage conditions. The display is user-friendly, offering real-time temperature readings and a simple interface for setting desired temperatures.

The cabinet design of the G31010 prioritizes user convenience with its solid, self-closing doors that come equipped with an efficient door hinge system. This feature prevents cold air loss and ensures that the unit remains energy-efficient. The unit also comes with adjustable shelving, allowing for flexible storage configurations to accommodate various food items.

Energy efficiency is another hallmark of the Traulsen G31010. This refrigerator is engineered to exceed government standards for energy consumption, translating to lower utility bills and reduced environmental impact. The combination of efficient insulation and a highly effective evaporator system maximizes energy savings without compromising cooling performance.

In summary, the Traulsen G31010 stands out as a premier choice for commercial refrigeration needs. With its durable construction, advanced cooling technology, precise temperature control, and energy-efficient design, it represents a perfect blend of reliability and innovation for any busy kitchen environment. Investing in the G31010 means investing in quality, performance, and peace of mind for your food storage requirements.