Specifications, Electrical Data | Traulsen RSL232NUT-FHS guide

Project	Quantity	Item #
Model Specified:		CSI Section 11400

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel. The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included.

Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA	RSL232NUT	RSL332NUT
Net capacity cu. ft.	46.0 (1303 cu l)	69.5 (1969 cu l)
Length - overall in.	521⁄8 (132.4 cm)	765⁄16 (193.8 cm)
Depth - overall in.	35 (88.8 cm)	35 (88.8 cm)
Depth - over body in.	32 (81.3 cm)	32 (81.3 cm)
Depth - with door open	553⁄4 (141.6 cm)	553⁄4 (141.6 cm)
90 degrees in.
Clear door width in.	211⁄8 (53.6 cm)	211⁄8 (53.6 cm)
Clear half-door height in.	271⁄2 (69.9 cm)	271⁄2 (69.9 cm)
Clear full-door height in.	575⁄8 (146.3 cm)	575⁄8 (146.3 cm)
Height - overall on 6" legs	831⁄4 (211.5 cm)	831⁄4 (211.5 cm)
Shelf area sq. ft.	34.6 (3.21 cu m)	51.9 (4.82 cu m)
Net Wt. lbs.	700 (318 kg)	995 (451 kg)
ELECTRICAL DATA
Voltage	208-230/115/60/1	208-230/115/60/1
Feed wires with Ground	4	4
Full load amperes	10.2	18.4
REFRIGERATION DATA

Refrigerant	R-404A	R-404A

BTU/HR H.P.1	4130 (1 HP)	2 x 5560 (3⁄4 HP)

NOTES

NOTE: Figures in parentheses reflect metric equivalents. 1=Based on a 90 degree F ambient and -20 degree F evaporator.

2=For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information on remote models, please refer to spec sheet 12-2.

Refrigeration System

The fast-freezer includes an auxiliary fan for increased air circulation and a boost in refrigeration so the cabinet can operate in the -10 to -20 degree F range. Increased refrigeration is accomplished by the use of a 1 HP in lieu of a 3/4 HP compressor on a two section narrow model. On a 3-section narrow door model, we supply (2) 3/4 HP compressors in lieu of a (1) 1 HP compressor.

These freezer models contain mullion coolers with an auxiliary fan for increased air flow throughout the interior of the cabinet. This affords maximum heat transfer between the air and product, resulting in faster freezing.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, Defrost Lockout Feature and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

Equipped With One NEMA L14-20P Plug (two section model only)

Full load amps and plug style may vary depending on electrical options

chosen and condensing unit employed.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and

any additional warranties. For fast order entry: Fax 1 (800) 765-8728.

Continued product development may necessitate specification changes without notice. Part No. TR35807 (revised 1/07)

REQUIRED CLEARANCES

In order to assure optimum performance, the condensing unit MUST have an adequate supply of air for cooling purposes. Therefore, the operating location must either have a minimum of 12” clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit. Clearance of at least 12” above is required in order to perform certain maintenance tasks.

SECTION	TRAULSEN
SECTION	4401 BLUE MOUND RD.	FT. WORTH, TX 76106
7-5	PHONE 1 (800) 825-8220	FAX-MKTG. 1 (817) 624-4302

Website: www.traulsen.com

RSL232NUT-FHS specifications

The Traulsen RSL232NUT-FHS is a state-of-the-art refrigeration unit, specifically designed for commercial kitchens and food service environments. This model combines robust construction with advanced technology to ensure optimal performance and reliability in preserving perishable food items.

One of the primary features of the RSL232NUT-FHS is its impressive cooling capacity. Equipped with a two-section design, this unit provides ample storage space for a variety of food items. With a total capacity of 49.5 cubic feet, it can accommodate large volumes of ingredients, making it ideal for busy restaurants and catering operations.

The cooling system of the RSL232NUT-FHS utilizes a self-contained refrigeration system that operates efficiently to maintain optimal temperatures. This unit features a temperature range of 33°F to 41°F, ensuring that food stays within the safe zone for storage. The use of environmentally friendly refrigerants is another highlight, making it not only efficient but also eco-friendly.

Another significant characteristic is the construction of the body, which includes a stainless-steel exterior and an aluminum interior. This not only enhances durability but also facilitates easy cleaning and maintenance. The solid doors come with a gasket system that provides an excellent seal, minimizing temperature fluctuations and energy consumption.

The Traulsen RSL232NUT-FHS also comes equipped with advanced technology such as digital temperature controls and an exterior LED display. These features allow for easy monitoring of internal temperatures and quick adjustments as needed. Additionally, the unit is designed with a unique air distribution system that ensures even cooling throughout, protecting food quality.

For user convenience, the RSL232NUT-FHS has adjustable shelving that can accommodate various sizes of food items and containers. The shelves are made of durable materials that can withstand the rigors of a commercial environment. Moreover, the unit is designed with ergonomics in mind, featuring easy-to-grip handles and a user-friendly layout.

In summary, the Traulsen RSL232NUT-FHS stands out as an exceptional refrigeration solution for commercial kitchens, offering a combination of ample storage, efficient temperature control, and durable construction. With its advanced features and reliable performance, it is an ideal choice for food service operations that demand quality and efficiency.

Specifications

Construction, Hardware and Insulation

DIMENSIONAL DATA

RSL232NUT

RSL332NUT

ELECTRICAL DATA

REFRIGERATION DATA

BTU/HR H.P.1

4130 (1 HP)

2 x 5560 (3⁄4 HP)