Traulsen TR35758 warranty Specifications, Dimensional Data AHT132DUT AHT232DUT, Electrical Data

Page 2

Project

Quantity

Item #

Model Specified:

 

CSI Section 11400

 

 

 

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four

(4) adjustable 6" high stainless steel legs are included.

Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA

R/AHT132DUT

R/AHT232DUT

Net capacity cu. ft.

17.7 (501 cu l)

42.0 (1190 cu l)

 

 

 

Length - overall in.

24 (61.0 cm)

48 (121.9 cm)

Depth - overall in.

35 (88.8 cm)

35 (88.8 cm)

Depth - less handle in.

3334 (84.4 cm)

3334 (84.4 cm)

Depth - over body in.

32 (81.3 cm)

32 (81.3 cm)

Depth - door open 90° in.

5434 (139.1 cm)

5434 (139.1 cm)

Clear door width in.

1858 (47.3 cm)

19916 (49.7 cm)

Clear half-door height in.

2712 (69.9 cm)

2712 (69.9 cm)

Clear full-door height in.

5758 (146.3 cm)

5758 (146.3 cm)

Height - overall on 6" legs

8314 (211.5 cm)

8314 (211.5 cm)

RHT Net Wt. lbs.1

330 (150 kg)

574 (260 kg)

AHT Net Wt. lbs.1

290 (132 kg)

446 (202 kg)

No. Standard Shelves

3

6

Shelf area sq. ft.2

14.2 (1.3 sq m)

31.6 (2.9 sq m)

ELECTRICAL DATA

 

 

 

 

 

Voltage

115/60/1

115/60/1

 

 

 

Feed wires with Ground

3

3

 

 

 

Full load amperes

8.0

10.4

REFRIGERATION DATA

 

 

Refrigerant

R-134a

R-134a

BTU/HR H.P.3

2220 (13 HP)

4200 (12 HP)

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= For shipping weights and dimensions please refer to spec sheet 12-4.

2= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.

3= Based on a 90 degree F ambient and 20 degree F evaporator. For information on remote models, please refer to spec sheet 12-2.

Equipped With One NEMA 5-15 P Plug

NOTE: Full load amps and plug style may vary depending on electrical options chosen and condensing unit employed.

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

Elevation -Elevation -

R/AHT132DUTR/AHT232DUT

Plan - R/AHT132DUT

Plan - R/AHT232DUT

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.

Continued product development may necessitate specification changes without notice.

Part No. TR35758 (revised 1/07)

 

Section - All Models

 

 

 

 

 

SECTION

TRAULSEN

 

 

 

4401 BLUE MOUND RD.

FT. WORTH, TX 76106

 

 

1-4

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

 

 

 

Website: www.traulsen.com

 

 

 

 

 

 

 

 

Image 2
Contents Width Reach-In Refrigerator Models Standard Product FeaturesOptions & Accessories Electrical Data SpecificationsDimensional Data AHT132DUT AHT232DUT Refrigeration Data

TR35758 specifications

The Traulsen TR35758 is a high-performance commercial refrigeration unit designed to meet the needs of restaurants, catering operations, and other food service establishments requiring reliable and efficient storage solutions. This refrigerator is part of Traulsen's line of advanced kitchen equipment, known for combining durability, functionality, and energy efficiency.

One of the standout features of the TR35758 is its spacious interior. With a capacity of approximately 58 cubic feet, this unit provides ample room for storing a variety of food and beverage items. It is designed with adjustable shelving, allowing operators to customize storage configurations to fit their specific needs. The interior is constructed from stainless steel, ensuring durability and making it easy to clean, which is crucial in a busy kitchen environment.

In terms of technology, the Traulsen TR35758 utilizes a state-of-the-art refrigeration system that ensures consistent cooling and temperature control. The digital display on the front of the unit provides real-time temperature monitoring, along with adjustable temperature settings. This feature allows users to easily manage the climate inside the refrigerator to meet the requirements of different perishable items.

The TR35758 is also designed with energy efficiency in mind. It uses eco-friendly insulation and a high-efficiency compressor, which helps reduce energy consumption while maintaining optimal cooling performance. This not only lowers operating costs but also contributes to sustainability efforts in food service operations.

Another key characteristic of the Traulsen TR35758 is its ergonomic design. The unit features self-closing doors, facilitating quick and easy access while minimizing cold air loss. This design is particularly beneficial in busy kitchens where efficiency is crucial. Additionally, the doors are equipped with a positive seal to help maintain consistent internal temperatures.

For added convenience, the TR35758 comes with a variety of accessories, including leg kits and casters for mobility, enhancing its versatility in any kitchen layout. Overall, the Traulsen TR35758 stands out as a robust, efficient, and user-friendly refrigeration solution, making it an essential component for any food service operation focused on quality and reliability. Its combination of advanced features, energy efficiency, and practical design makes it a top choice for professionals in the culinary industry.